Search results for query: *

I made a push in breather with a pcv for my Ramcharger, but ended up making a smaller one out of a chrome oil cap. This is a chrome breather I drilled a hole into, then added a rubber grommet and pcv valve. I pulled out the inner material. It comes with a 1 1/4" grommet for the valve cover...

I am ready to start assembling my 440 budget build. I need to measure the bores, and I don't have a bore gauge. No one I know owns one, and I don't want to spend a fortune on a tool I will use once in my life. I can buy a China made piece of junk for $50, but then I wouldn't really trust it, and...

I had this driveshaft made when I put the Dana 60 in my car and it still had the 318 / 904. I wanted 1350 u-joints on both ends, but apparently there wasn't a yoke for the 904 in that size, so it is large Mopar u-joints. It is 47 1/2" center to center on the u-joints. It was made with what they...

I have the windshield washer reservoir from my 73 Dart Sport for sale. It has some light crazing and the mounts are intact but cracked. Asking $15 plus the ride from North Branch, Minnesota.

I have an RPC 24" stainless steel radiator hose kit. It has 24 inches of hose, 2 chrome aluminum end caps that hide the hose clamps, adapters to make it work for 1 1/4, 1 1/2, and 1 3/4 hose and the hose clamps. It is very sharp looking. I have a Coolflex upper hose on my Dart and wanted the...

I have a set of Moroso tall billet aluminum valve covers for a small block Mopar. They originally came on my 408, but I went with Mopar Performance covers and never used them. They are in great shape. They have been notched so they sit flush along the intake and don't leak oil. There are a few...

Hey, Valvoline was closing out their synthetic VR1 oil and I bought about 5 cases from a buddy of mine at O'reilly's. He knew I liked synthetic high zinc oil. I bought it at $3.99 a quart. Unfortunately I use Amsoil Zrod and really have no use for this oil. I will sell it for what it cost me. I...

Holy crap are they getting some big money for these things on eBay! I just want mine to go to someone who can use it. I had it in my 73 Dart Sport with a 318 and 904. I went to a 200R4 and a TV cable, so this is just laying on the shelf. I will let it go for $40 plus the ride. US shipping will...

I sold the left side, but still have the right. This pivot works perfectly. No binding or stiffness. I cleaned it up and painted it and it looks fantastic. The OE part number on it is 3431680. $25 shipped anywhere in the lower 48. My Canadian brothers can have it for $20 plus whatever actual...

I have the original two row radiator from my 73 Dart Sport 318 / 904 set up. It is in very good condition, with no leaks. I used it until I went to an aluminum set up. I cleaned it up and painted it. It has four marks in the fins where I had mounted the external transmission cooler. There is a...

I have my old chrome air cleaner for sale. I decided to go to black with a K&N filter and this is just gathering dust. I don't know what brand it is, it came with the car when I bought it. I did put in a Spectra filter from AutoZone last fall. It's a lifetime washable filter that looks just like...

I have two radiators for sale. One is from my 73 Dart originally 318. I don't know if it is the OE radiator or not. It is a two row 26" X 18", upper left top hose, lower right lower hose. It has an internal transmission cooler. I used it up until I went aluminum. It has four marks where the...

I bought this blower fan switch new on eBay. It looked right and claimed to fit my Dart, but this has a 4 blade connection and mine has 3. I paid a lot of money for this but will let it go on FABO for less than half of what I paid. $20 plus shipping takes it, and shipping will be minimal. It is...

I am selling my Moroso tall fabricated aluminum valve covers. Both covers have openings for breathers, and two breathers are included in the sale. I forgot to take pics of the breathers, but can get some if need be. The PO of my motor made 12 runs with these valve covers. I never used them at...

I have two driveshafts off my 73 Dart Sport. One is the original that went from the 318/904 to the OE 8 1/4 rear end. It has the Mopar small u-joint set up. It is in great shape. $75 plus shipping. The other is from the same 318/904 set up to a Dana 60 rear end in the same car. They don't...