Search results for query: *

I have a 67 Barracuda with a 318 engine, factory radiator and shroud. The shroud fits the radiator just fine but the 7 blade fan hits it on the passenger side. It's way off by at least 1.5". It used to all fit when I had the 273 engine in there. I don't know what's off. I'm thinking...

I have a stock 68 Barracuda with a 6 banger 225 engine and am in need of a new heater core but one side is 1/2" hose and the other is 5/8". I cannot find a heater core that matches, the ones I found are all 5/8" for both. I'd prefer not to have to both at 5/8" because I'd have to use an...

My 360 stock engine in the 67 Barracuda was running hot with at 2 core aluminum radiator so I decided to go with a 3 core Champion aluminum unit. Problem now is that the 7 blade fan with clutch won't fit, it's only got about 1/8" clearance. Is there another clutch available that's shorter...

So far it's a real PITA. I've got the dash completely out and still can't get to it. Anybody done this job?

I need to know where to purchase a radiator for a 67 Barracuda that is setup for a 360 motor and automatic trans. I'd like it to fit without modifying the car and the outlet has to be on the passenger side. It would also be nice if it didn't break the bank. Thanks.

I have a friend with a 93 Dodge Spirit (Yes, I know it's not an A-body) with a 4 banger in it. The temperature gauge fluctuates while driving. It goes from 3/4 hot to almost cold. I have changed the thermostat, no change. There seems to be plenty of flow in looking in the radiator and the...

I have a few cans of the ever-so-rare R-12 refrigerant left over and I want to add it to my 69 Barracuda. What is the proper way to do this? I have the proper old R-12 hose but no pressure meter attached to it. I have heard some people say keep the can upright while others say tip it upside...

I know its not an A-body but it may apply some day. I have a 94 Dodge van with a 318 and I noticed a lot of water in the crankcase when I checked the oil. I suspected a bad head gasket so I tore into it and popped the heads. The gaskets were good, no sign of any leakage at 140k miles. I then...