Search results for query: *

I am presently running 3:55 gears with 24 in tall tires. At 60 MPH the car is revving at 3100 RPM's. I have a set of 3:23 gears in another pot and was wondering what difference I would see with a gear change. We are looking at a trip next summer and I was wondering if it would be worth my while...

I have a question that perhaps someone here can answer. I have an 8 3/4 in my dart with small bolt pattern. I also have an early b body 8 3/4 housing with axles. My question is- how difficult would it be to make the big bolt pattern axles fit my a body housing? Would it be as simple as getting...

I am looking to see what other people do for a cradle for the center section in their 8 3/4 rear when they change center section. I am using a floor jack and holding the center section on the jack by hand. That works ( just), but there most be a better way! let me see what I should be using. I...

I need help! I am chasing leaks in my 727 and it is driving me to drink! I thought the pan was leaking so I replaced it and thought I had it solved. It is still leaking and not from the pan. Th leak is on the tail of the tranny behind the pan and is running down the pan. I think that it might be...

Well I put a new pan on my 727 tonight. When I removed the old pan it had quite a bit of shavings in it. The tranny works prefect and I want it to stay that way. Should I be concerned?

I am putting a new pan on my 727 and have a question. Should I put any sealer on my gasket or just install and make sure I do not over tighten? The gasket supplied with the pan is rubber. thanks for your replies!

I need to ask a question about the 727 in my dart. When it sits the tranny leaks bad. Alao when I start the car up I have to put it in neutral so the convertor will fill up and work. Could the convertor losing it's fluid be causing the leaking? I was wondering if the fluid from the convertor...