Search results for query: *

wondered why my car wasn't running right, it turned out one of my pushrods went thru one of my rockers. what kind of rockers pushrods would you recommend ? I have a 360 10:1 compression with a purple shaft 474 lift cam. thanks

I have a 73 scamp with a 360 super thermoquad ( rebuilt by scot smith) a carter electric fuel pump. I have a ready to run hei distributer and coil, I lined up the timing to tdc, made sure my wires are right im getting gas and spark I cant get this thing to run so I can time it...

I bought a lokar throttle cable kit DP-1000HT for my 73 scamp the only problem the cable don't fit...any ideas ?

I have a 73 scamp with a 360 4- speed I installed a edlebrock performer intake manifold and topped it with a thermoquad I cant find any throttle brackets that will work,my old 2bbl bracket wont work. I bought a 340 4bbl bracket that didn't work..i tried to modify it so it would work, but it...

I am getting my 73 scamp with a 360 ready to run but when I hooked up my throttle cable I don't get much action out of it. the first pic is without my foot on the gas. the second is with my foot in it. am I doing something wrong, or do I need a different setup ?

I have a canton oil filter adapter and I have a small leak, I need to tighten it but I'm having trouble finding a wrench to fit it. does anyone know what size wrench I need ?

I have a stock spread bore thermoquad intake manifold on my 360, looking inside my manifold I notice I have whats called egr floor jets inside my manifold. since I'm not running egr stuff in my engine do I need these ?

i have a 360 im going to run a thermoquad on. i have two manifolds the stock thermoquad manifold, the the other a Eldebrock SP2-R318 alum. manifold. which is the better one for me to use ?

i have a 360 which i took out of a 1979 newyorker. its going in a 1973 scamp which had a 318 in it. which motor mounts do i use ?

i have a 360 rebuilt and never run, i hope to install it this winter, i had the compression raised to about 10:1, it has a mp cam 474 lift and i had the heads worked. im thinking about retro fit roller lifters & roller rocker arms. how would this work, is...

I have a slightly modified 360 v8 that im putting in my 73 scamp. i have a super thermoquad in a box that needs to be rebuilt. i also been looking at a new street demon, i was wondering what would work best ?