Search results for query: *

I cant get the choke to work on cold start any ideas ?

I have a 360 with a thermoquad carb on it, no matter what the timing is or how I set the curb idle screw I cant get it to go any lower then 1500 rpm...any ideas ?

I have a 73 scamp with a carter electric fuel pump and I need to regulate the pressure. my fuel lines are in the stock location. I need to know where the best place to mount the regulator inline without any crazy twists or bends

I have a 73 scamp with a 360, thermoquad carb and an edelbrock manifold, the stock carb linkage would not work with the manifold. so I got talked into buying a lokar setup. I first tried to hook it up the way I would hook up a stock one, when I pressed the gas pedal down it was too loose. then...

I have a 73 scamp with a 360 4bbl that I'm putting togather. I has a new fuel tank and sending unit and new fuel lines. I installed a new carter mech. fuel pump and an inline fuel pressure gauge, in the back I have a canister fuel filter above the tank. I went to start the car and it...

the fuel inlet nut on my carb has a couple of boogered threads. what size tap do I need to clean up my threads ?

I got a new fuel tank for my scamp, which has a vent on the top I bought a new sending unit for my tank which also has a vent on it which one do I use and which one do I plug up ? the vent hose goes to the canister up front

I would like to put a electric fuel pump on my 73 scamp, they tell me the pump has to be lower then the tank....where would a good location be ?

is it suppose to come apart like this ?

I have a carter fuel pump, then when I tighten the flare nut ( no cross threading ) and stert the car fuel gushes out. I even tried thread sealer it seems that the fuel line isn't seating properly is there a o ring that goes in there ?

since I'm not running any emissions on my car, I'm just using it vent. can I plug anything on the canister ?

I have a thermoquad with an electric choke theres a wire that goes to it. is that power or a ground wire ?

the sending unit in my fuel tank has a 3/8 line comming out of it, i want to hook it up to a 5/16 fuel line. what do i need to adapt the two lines ?

i know this may sound like a dumb question but i gotta ask. i have a 3/8 line comming out of my fuel sending unit, and my fuel pump has a 3/8 npt inlet/ outlet can i run a 3/8 fuel line throughout ? im running a 850 thermoquad.

i have a 73 scamp, and while i had the gas tank out i decided to replace the sending unit. i ordered one from Right Stuff Detailing. however it looks shorter then the one i took out of my tank. suggestions ?

years ago i removed my gas tank, drained it and stored it in my basement. now im rebuilding my car and want to install my tank. i called my local radiator shop to have to have it boiled out. i was told they would have to send it out to have it boiled out and have it coated, and it would be...

on my 1973 scamp, the numbnut who owned it before me removed all of the emmision equiptment and discarded it. now im rebuilding it and i want to install the fuel vapor canister,because i would like to install a return line to vent the system. the only thing is im having problems finding a...

has anyone ever tried to install a shaker scoop setup on an a body ?

i have a 1973 scamp with a 360 and a thermoquad carb on it and would like to get more air into the carb. does anyone make a ram air setup that i could look into ?

looking for a company that does quility rebuilds/ flowtest for my thermoquad