Search results for query: *

I have 1 trim ring for a 66 barracuda for sale $55 with ride in lower usa , I was just in a very bad 2 semi vs my Nissan Altima accident so I cannot correct to almost as nos , but with some time and a sandbag and small splices of wood it can be done , I hace done many 64-65 . so there are 2...

Tim you jinxed me again . just before surgery I had to take the cuda out for 1 more rush thing was running gr8 went out did a few smoke runs , came back went threw town and hit a stop light . Some guy came up next to me in a newer camero and wanted to try it . so we agreed on the GREEN...

so much after market stuff being made now days , what head fits the best and gives the best performance on a small block stroker

the devil was in the details . my distributor was wabbling , felt like an egg was in it for a rotor . So I took off the capp rotor was tight , so I pulled the lockdown bolt out and pulled the distributor . My intake is an aftermarket ,So I got looking down the didtrib. hole and looking around I...

looked like my distributor shaft was wabling I took it out seemed fine without extensive testing yet , it is an msd no vac secondary when we put it back in with new rotor it likes to be set at about 20-23 degree"s before tdc and hates to get advanced any. my distributor wire has never...

I know Ive been away for a while but its summer ,new built 360 , I am having trouble getting my timing to settle down , and it seem to do opposite of what I want it to . I set it at 7 degree"s advanced and some times it goes wacked on me going from 7 adv.to -8 brand new motor but 10 year old...

I need to get some new pushrods again soon I used green monster 2 piece with a cup and ball with pressed swivel cup last time they cost a fortune any 1 else using a similar pushrod custom cut for a better price or am I just paying extra $ with the spinning cup verses the pressed cup ??

hello all , hope your summers been better than mine . I spent 2 years waiting to build my 360 la motor , We got it in and broke the motor in had 7 hours tops on motor and in 2 minutes the valve train /roller rocker adjustment studs backed out and took out motor .UN FREAKING REAL. some how...

hey all I just got my 360+ build done and in , first shake down run today , I have a new tsi trans with a 3200 stall that doesn't seen to be stalling ?? I have a m1 intake , mechanical msd , 525 lift 309/288 comp cam with a 650 dp/df mechanical secondairies. 2 and 3 rd gear are awesome in the...

I finally got my new motor in , been building it for 2 years while driving it with the 340 until the motor was shot . so any ways I built a 360 550 lift comp cams ca 206 305 /280 @ 108 or close to that . 650 dp holley manual seconds ,on a m1 intake , with a 3200 stall tsi trans 3.23 rears. did a...

HEY ALL FABO FREINDS my new motor is in and running thanks to a lot of fabo help . I built a motor close to a tony sanchez recipe. IT"S a71 360 LA base block built to some wheres around 366 to a 372 this bleeper Rocks backed up by a TSI trans nested in my blue 65 BARRACUDA . So I have...

finally getting back to my engine now that it is above 30 degree"s ,its going in next week and I was wondering 2 things they are 2.02 rhs 360x heads bowled with a victor intake 525 lift with about 300 advertised duration .automatic.3:23 sure grip with a tsi tranny m.s.d. 6 al will be gapped...

my motor is finally getting close but having a problem with my geomitrty of my 1.6 crane gold rockers sitting to far forward on my new indy headed valve stems .It seems they want to sit a bit past 1/2 way on the valve stem. I had them on my 340 j heads and they sat back a little bit before 1/2...

must be in good shape if you have a whole motor s/b mopar engine , don't care if its blown or not running , I am looking for the whole set of bolts from the oil pan to the intake ,tranny attachment bolts flex plate to fan, must be in gr8 shape good threads , no stripped bolts or nuts , also...

where can I find a complete set of nuts and bolts for a small block mopar to use while building this new motor , I don't want to use no bugered up 50 year old 1/2 stripped chit on this motor does any 1 out there sell a complete package from pan to carb , fan to u joint that I can buy , so...

hey all I am finally buidling a motor 2 years behind and not a stroker . what we got was a 1971 360 block with a passenger side timing and drivers side water pump. We ran into a problem we overlooked right away I wanted to put in a cooler radiator that runs passenger side bottom . the timing...

I have a guy in Georgia that has a shed and a bus full of old LA motors ,cranks ,heads, blocks and is a vatran with 1 leg and 1 arm ,he is 70 and done playing with cars he was an old mechanic and has a ton of parts for sale , let me know if you are interested in any mechanical pre 80 mopar...

I been wanting my 360 strokedfor almost a year , been hit buy every thing lifecould put in my way sonow I am to the point do I just build a 360 .030 over for the short block , build a stroker shortblock , or buy a stroker shortblock im not going crazy just a 425 or 450 hp not a 10 k motor...

I got a line on some diamond stroker pistons ,, do they have the same pin highth as a 360 bored .030 4.030 and I will be looking for a 904 72 -80 within 200 miles of Madison wisc probly just a rebuilder no tourqe converter needed unless a 10 inch just a case be fine thanks

i got a 1971 360 engine i found some nos rods for it but the #s say the wont work on a 71-72 wondering why the casting# is 3418645 the part # came back 3751015 or 4387244 neither says for a 71 360 , they come back to 76-90 318 ,74-75 360 hp ,or 76-90 360 is there any reason why they...

ok down to my last 2 choices i think give me your input eddy or indy ok i am looking at 2 sets of new heads 1ndy la x head 179 intake runners up graded to 2.05/1.625valves with correct sizing intake port match and gasket match and minor bowl with 600 lift springs + 1 air gap intake...

need help setting my roller rockers for first time on steel j head hydrolic lifter

what is a nice set of smallblock mopy of course for 570 lift $ breathing for the bucks around 1500.00 indy eddy rhs wich way do i go strokin 408 comp cam mag 305 hydrolic