Search results for query: *

We are currently dropping in a 440 into a 71 Dart. The car is a race car and the motor is mounted using elephant ears. There doesn't appear to be enough room for headers. The inner fenders are still in place. Which brand of header can we use and not cut the inner fenders up to much??? Looking...

I have a one wire denso alternator that I want to put on my race car. I have the standard kill switch at the back of the car. Also using a ford style solenoid. I had it on and running but the kill switch won't kill it. How do I need to wire it to make the kill switch work?? Thanks Jeff

Switching to coil overs on the back of my 69 dart and was wondering if someone could help me get the right springs for it. The car is track only and weights 3100 lbs with the driver.

I'm using a Pro Form electric on my race car and was wondering how thick other electric water pump brands are. I would like to use a fan/shroud combo I found but don't have enough room. Please measure from the timing cover out to the end and post what brand it is. Thanks Jeff

What should your shift point be if your engine makes peak torque at 5100 rpm and peak horsepower at 6100 rpm? 417 stroker backed by a 727 in a 69 dart drag only car

Finally got to hit the local track again. I had put new slicks on and was hoping for improvement. The weather cooperated while we ran time trials. My car had been slowing down and I was worried the converter was going away. Well the temp was only in the upper 70's and the air was excellent...

I finally got my motor back and have it installed along with all new front suspension. The front suspension is the Dillinger system. What should I have the front end set to for drag racing only????

Does anyone else have trouble with these pumps besides me??? The longer it runs my fuel pressure keeps dropping off.

I have a motor plate installed on my 416 stroker 69 Dart drag car. Along with this I have an proform branded electric water pump. My issue is the water pump gasket on the engine side of the water pump will leak. I have tried using 2 gaskets but they still will slip out and leak. I have found the...

What should my pinion angle be on my rear end? My 69 dart is equipped a coilover ladder bar rearend. Thanks

I'm looking for pictures of alternators on a small block with a motor plate and an electric water pump. Would like to add an alternator on my race motor to keep the voltage up for the MSD. Anyone have ideas, pictures or does someone make a kit? Thanks Jeff

Can anyone tell me how far apart the screws are spaced on 15" wheels? I know you can buy a guide or something but I was hoping someone might know.

Is there any advantage to not running a power valve in a drag car? And how do you compensate on the jetting?

After making a pass at the strip last evening something wasn't right. No noises and oil pressure was fine. The motor won't idle down. Normally it idles at 1500 but last night couldn't get below 3000. My buddy took a rag and covered the carb opening. Then it idled down some. I've also been told...

Has anyone purchased a convertor or transmission from Dynamic Convertors of Pro Formance Transmission's recently???? I've can't seem to find their website. Did they change the name??? I even googled Lupo and didn't come up with much.

A friend of mine recorded my run for me at Great Bend Kansas. I went out second round. Broke Out by .17

I'm installing a 414 stroker equipped with Indy 360-1 heads. Which headers do you buy? I bought a used set but they won't fit my 69 dart. They were installed on this motor in a duster. I assumed that they would fit. As usual I was wrong. I guess I don't know what questions to ask.

I bought this 69 Dart race car roller. Here are pictures of it's progress from the beginning. The first picture shows the wiring and shifter and other assorted stuff that I removed from the interior. The rest show areas of future repairs.

I had a good night and went 4 rounds last night. Of course 1 round out of the money. Drats..