Search results for query: *

Well I was taking my heads apart to clean them up and start to do a little port work when I found this crack at the top of the guide under the spring. Any opinions as to how to fix or is this fixable? Should I be concerned or is this ok? The heads aren't anything special just 587 casting 360...

ok guys and gals, im gonna try this cam i just purchased from a member on here. here is the link to the ad for the cam. http://www.forabodiesonly.com/mopar/showthread.php?t=264425 my question is what lifters do you recommend for this cam and why. thanks in advance!!

this is my first time messing with adjustable rockers and a hydraulic cam. i usually just run stock pushrods and stamped steel rockers but figured i should maybe give the adjustable stuff a try! have a look at the pics the first couple are with the valve at max lift open then the last two are...

i have a 71 360 torn down to the short block and i look at the pistons and see what i was expecting!! the supposed 71 only 360 flat top pistons!! as i look closer thru the carbon build up i can see stampings on the tops so i cleaned one off and this is what i see 34189 25 O/S and a large T that...