Search results for query: *

Have a nice Torker 340 small block intake. I had it blasted so it is very clean and raw aluminum finish. The bottom side has a little gasket residue left on it where it had some sealer on it. all holes are in good condition. The 4 outer carb mounting holes have been fixed with helicoil inserts...

Small 7260 fine spline yoke, greasy but good condition. Includes straps and bolts. $40 shipped in the 48 Located south central PA 17252 PayPal preferred

Cast iron Adapter with bolt good condition needs cleaned up. Date code appears to be 1 02 9 $65 shipped in the 48 Located south central PA 17252 PayPal preferred

Sold pending payment Set Of really nice original small block adjustable rocker arms. These have the banana groove shafts. Complete set up including all spacers, holddowns, bolts, and stock length pushrods. Oily from being pulled from running engine. These have also been clearanced for slightly...

Set of 4 valve cover finned wire loom holders from 273 commando valve covers. Someone painted them blue in the grooves and the plastic inserts are missing. Overall really nice set. $70 shipped in the 48 PayPal only Located south central pa 17252

(Sold pending payment) Pair of small block aluminum M/T valve covers. Decent condition they are black wrinkle painted but would need to be redone to be really nice. $95 shipped in the 48 PayPal only Located south central pa 17252

1 set of small block adjustable rockers with Banana groove shafts. Complete set up. Will need cleaned up. I soaked them in parts cleaner so they are not oily. They will clean up nice. Just have a coating of dried crud on them. $165 shipped in the 48 PayPal only Located south central Pa. 17252

Here is the bracket that bolts to the tailshaft housing for automatic floor shift console linkage. Overall nice clean original part not rusted and pitted up. The linkage bushing is worn and should be replaced. Check out the pics Asking $30 shipped PayPal only Located south central Pa 17252

Pair of factory Early A 273 exhaust manifolds. They are pitted but are 100% usable just not show condition. Perfect for that V8 driver swap. These have been blasted. Then painted with high temp cast paint. The heat riser has been plugged and welded shut. Also included is the short 2 bolt driver...

Used Early A 273 bell housing clutch inspection dust cover. Fits the 9.5” clutch bell housings. Overall good condition. Has a small dent in it. Check out the pictures, feel free to ask any questions. Asking $55 plus shipping. PayPal only Located south central Pa 17252

Used 122t early A 273 flywheel For 9.5” clutch it had some flash rust on the surface so I took sand paper to it to check the condition. I see a few heat cracks, Other than that it looks pretty good. Check out the pictures please ask any questions or let me know if you need more pics. Asking...

Here is a Gear Vendors digital control box # 1E171109 and matching switch panel. These were pulled from a car that had a 727/GV combo the mechanical parts got sold and these were left behind for an unknown reason. I do know the car was barely driven when the drivetrain was in it. The car was...

Bare 742 case with bearing caps. Take a look at the pics feel free to ask any questions. This is how a got it, other than I degreased it. Asking $80 plus shipping And PayPal fees PayPal only Located south central Pa 17252

Richmond 4.57 R&P just removed from the 489 case I have listed in another ad. I never ran the center section. I just pulled it apart for the suregrip unit. It turned smooth with no tight spots. I do see some peppering or tiny pits on the faces of the gears. I don’t see any rust. Checkout the...

Selling an empty 489 case. Comes with caps, bolts, adjusters and adjuster locks. overall a nice case not rusted up. Just needs a good cleaning. located south central Pa 17252 PayPal only $75 plus actual shipping

Selling a new in box 90012 professional products SFI approved balancer fits 318/340/360 and magnums comes with 3 different weights. It’s been on the shelf for a few years and haven’t used it yet. So I’m gonna let it go. Check out the pics some paint is off from box wear. New from summit racing...

uncut/unported LD340 intake Just blasted 12/11/19. it is clean raw finish. All thread holes are good except the left side water neck hole must have been drilled out and tapped at some point in its life. It is the proper size but the hole is slightly to the left (see close up pic) I never...

selling a pair of 340 manifolds. Driver side casting # 3614368 build date 4-20-73 Passenger side casting # 3418623 build date 9-15-72 Both manifolds have been blasted and painted with Hi-temp cast. Overall a nice set of manifolds light pitting, nothing deep or overly ugly. Sealing...

Selling complete Accurate LTD. reproduction exhaust system with original HP 340 manifolds. This is the turndown at the bumper tailpipe system (no chrome tips) $950 HP Manifolds are in good condition passenger side has the heat riser plugged with pipe plugs not welded on. No other repairs or...

Looking to move alot of stuff out of my basement/garage located in South Central PA 17252 Prefer not to ship the large stuff so if your close enough check out my Craigslist ad. Mopar Parts <---- click here for link Bucket seats A body rears Center sections Console 4 speed parts Bring a...

Up for sale is a 68 383 unsilenced air cleaner. Wrinkle finished appears to be original Correct for 68/69 340 383 cars. Included is the 383 pie tin also have the 68 383 automatic Carter carb date J7 # 4401s. I would say it needs a carb kit matched set up would be correct for 68 Dart GTS...

Complete set of small block adjustable rockers they NEED cleaned up. This is an as pulled setup. I kept the solid lifter push rods and will include a set of 16 almost new Crane hydraulic ball/cup push rods #69691-16 everything is there. these are Banana Grooved shafts also. Look at the pics...

I have forsale new chrome deep 727 transmission pan. This is an original Mopar performance part these have been discontinued for a while now. Come with everything except the filter but any stock filter works. The adapter and it's hardware are still new in the packet. New gasket also. Only...

Have a nice complete 68 383hp carter AVS # is 4401s J7 is the date code. it is a very nice carb except someone drilled additional mounting holes and one is larger than the others please look at the pics this will not affect the function of the carb but it does cosmetically. I would consider...

Looking to sell a set of 8 new (old) TRW .030 over forged pistons for a 318. They come with pins and rings, TRW # L2406 .030 These pistons are new still in the original box. I'm not real sure how old they are, But they do have some age to them. They show some white chalky corrosion on the...

I have a good condition fan shroud # 2998324 I believe it fits 70-72 slant 6 A bodies from my research. Overall nice condition but it will need cleaned up. But is a good functional piece with no cracks or any visual damage it has a slight twist to it but straightens right out when mounted...

I'm offering up a 70-72 318 340 22" original fan shroud not a reproduction. Condition is good, with some minor flaws the worst is the bottom part of the opening has a 4" long section that has been clearanced for some reason over the years. You could install it as is and wouldn't notice it...

Old set of stamped aluminum blue anodized small block direct connection valve covers. They have dings and scrapes not show quality by any means would be cool on a rat rod or just a daily driver. Check out the pics, no cracks or bad mounting holes. Asking $25 plus shipping PayPal and US...

Used cruddy small block MP valve covers they are structurally good no cracks or chips but they are ugly. They need blasted to clean up nice. Someone painted over the original black with orange and the covers have oxidized and is lifting the paint off of them. Asking $45 plus shipping Also...

I have a Milodon 8 quart capacity 360 oil pan w/ pickup tube that I got from another member on here, but have since decided not to use it. Pan # 30940 Pickup tube # 18345 It is a used pan that has a some scratches and the corner had a ding in it that was knocked out. Overall still a...