Search results for query: *

Hey guys im looking to buy a 4 speed for my 70' dart with a 440 motor in it. I recently had discussions on whether i need to buy an 18 or 23 spline A Body 4 speed?? I was under the impression that i needed the 23 spline but now im second guessing myself. If ya know let me know??????? Thanks Dave

Hey Guys, My problem is that my car surges forward when I'm stopped and the car is running. Its not real bad but definately noticable. I adjusted the idleing down which helped but can't go any futher or it stalls in gear. I also noticed that when I'm on the open road my car acts as though it...

Hi Guys, I have a 1970 Dart Swinger with a 440 motor and 727 transmission. The motor was bored .030 with a very small cam installed (a step or two over stock). The rearend is a 3:55. I'm NOT RACING the car at all, I'm using the car as a weekend driver and driving it to different car shows within...

Hey guys, I put a 440 with a 727 trans into my 70' Dart now my speedometer is off. My tire size is 245-60-15 and my rear gear is 3:55, according to the chart in the Yearone catalog I'm looking for a 36 tooth (RED) gear. If anyone has one or better information on how to make sure that I get the...

Hey Guys I put a 440 w/727 trans into my 70'Dart. I'm just about at the end of my project and run into a problem. The original kick down rod hits the automatic column linkage and won't let it move. Does anyone have an easy (or hard) solution to hooking up the trans kick down in an a-body with a...

Hey guys I'm having my transmission rebuilt and I need to know how much fluid this transmission holds. It's a 727 out of a 1972 Imperial and I'm putting a small stall converter in (2200-2800). Thanks Dave!!!!!!!!!!!!!

Hey Guys, I was hoping that someone out there would be able to guide me in the right direction. I have a 727 Trans. that I'm bolting to a 440 (rebuilt but not for racing) and I'm looking for someone to rebuild the transmission that is good and fair. I am trying to find someone in my local area...

I am currently putting a 440 with a 727 trans out of a 1972 imperial into my 1970 dart swinger with a 8 3/4 rearend. does anyone know what driveshaft will fit this conversion or do i have to have one custom made. Thanks