Search results for query: *

I need a pair of vinyl top drip rail moldings for my 71 Demon. These are a little wider than the non-vinyl top cars. The correct ones have a green marker line in the inside of the molding. Thanks, Eric

I'm looking for the internal pieces of the lighter/ashtray assembly for an A-body console.

I need an automatic console for my 68 cuda. Would like shifter, linkage, and top plates if you have those as well. Eric

Looking for a nice set of 340 S hood inserts for a 1968 Barracuda. Will pay good money for a nice set. Eric

Happy holidays all! I'm needing a few parts to complete my quest for the ultimate 68 a-body barracuda. Here they are: (1) Big block bellhousing (10.5 inch flywheel) (2) 4 speed console body (3) 4 speed hurst console shift handle (4) 3 sp wiper motor (5) Rallye woodgrain steering wheel (6)...

Looking for a good rebuildable or rebuilt 383 HP long or short block engine for my 68 Notchback, Prefer one that is in Texas, as I don't want to pay mega$$$ in shipping.

Looking for a solid 67-69 barracuda fastback to restore. I will go ahead and lay out my ideal preferences and we can start from there, but none of these are considered to be "must haves". Would like car to have nice metal but expect rust to be in the usual places (i.e. lower quarter panels...

Anybody out there have a 69 or 70 Road Runner solid project they would like to move? I prefer a 383 4sp car with vinyl top. I have a 68 barracuda coupe project that I would consider trading. I'm in Texas. PM me. Eric

Several years ago I bought a 68 cuda notchback to restore. But after I stripped down the quarters of all the bondo, it looked like someone took a ballpeen hammer to them all down both sides. Now I'm looking for a 2nd gen barracuda notch with good quarters that haven't been hammered and without...

Just stripped the bondo off a hood that I bought several weeks ago and I felt like a surfer when I saw all the waves. Anyone in Texas has a nice 70-72 Dart hood they want to sell?

Looking for a 69 b'cuda notchback to restore. Prefer something near Texas, but will consider something nearby. PM me to let me know what you got. Thanks

Hey everyone, Does anyone know where I can get a new woodgrain insert with metal backings for my rallye guage dash bezel. Just the plastic-backed decals won't work, because as you all probably know that after awhile the decals bubble up after exposure to heat. What solutions has anyone...

Looking for a good set of bucket seat latches and release button assembly for a pair of 70-71 highback bucket seats. PM me with price. Thanks, Eric

In my never ending pursuit for parts, I'm looking for: (1) Uncut rallye guage bezel (2) 8.75 sure grip third member 323 gears and 489 housing PM me with picks and price Thx Eric

I need an undamaged rallye dash bezel for a 71 Demon w/o AC (heater only). Please send pics and price to eschroeder1@austin.rr.com Thanks, Eric

I need a 71 340 intake manifold (casting number 3512100), and a pair of stock 71 340 valve covers. I believe the correct valve covers have the elevated spark plug wire loom on the drivers side and rubberized heat shield for the choke area on the passenger side. PM me with details. Thanks...

I need the following parts for my 71 340 Demon resto: 1) stock valve covers 2) stock intake manifold casting # 3512100 3) Radiator part # 3443975 4) Nice front grille 5) Nice uncut dash bezel 6) Radiator shroud 7) Headliner bows If you have any of these items PM me and let me know...

Hi everyone: I need a rear side marker light for my 71 Demon. Needs to be the chrome style with red lens and mounting plate. PM me with price Eric:snakeman:

I need a set of bucket seats for my 71 demon resto. Needs to have good springs THanks, Eric

Thanks guys and gals, my scavenger hunt is almost over. Still need the following parts: (1) 340 HP air cleaner (2) A833 4sp tranny (close ratio) (3) spark plug wire heat shield (4) flywheel (5) 71 bucket seats (I have a set of 73-76 A body bucket seats with tracks I would consider...

Want to buy a set of 71 a-body bucket seats with or without tracks for my 71Demon project. I have a set of 73-76 bucket seats that I can trade up or down. Thanks Eric

I would like to thank badlilred, crackedback, and jeffneal for comming through for me with parts, but I still need the following: (1) Engine pullies for a 340 no ps, no a/c (2) Throttle cable bracket (3) 340 HP air cleaner (4) A833 4sp tranny (close ratio) (5) spark plug wire heat shield...

I'm desparately hunting for the following parts for my Demon 340 1) Hood - prefer a fresh air hood with scoops, but will take a standard 2) Carter Thermoquad that will fit on a 1973 340 cast iron intake - looking for part # 3512820 (4972) if possible but will take anything that will work...

I need the following parts for my 71 Demon 340 resto 1) 340 block, steel crank, X heads, oil pan and stock intake. Prefer Aug or Sep 1970 date code. 2) 71 Demon hood Prefer to pick up items within 200 mile radius of Austin, Texas. But will consider crating and shipping costs from the 48...

Guys and Gals, I need the following parts for my 1971 Demon resto. 1) hood 2) front hood chrome trim 3) bell housing that will fit a 74 or later overdrive 4 sp trany to a 340, if such an animal exists. 4) vinyl top chrome trim 5) 14 inch small bolt pattern ralley rims Please send me...

Want to buy a 68 or 69 Barracuda coupe/notchback. Body must be in good shape with no, or only very minor, rust issues or body filler. No drivetrain required. A /6 set up prefered. The more original the car the better. Please detail what you have. Thanks Eric

Anyone out there have a 69 Formula S coupe or a 71 Demon 340 that they would like to trade for either a 1967 or a 1968 barracuda coupe. The 67 has a /6 in it with auto tranny, while the 68 is a v8 and auto without engine. If interested, let me know what you got. Thanks, Eric

Does anyone know of someone who rebuilds the KH 4-piston calipers? I have a set that came off a 68 barracuda that I need to get rebuilt. Thanks, Eric

Had a 71 Demon 340 3 sp when I was in high school back in '83. Regret selling it. If anyone has a complete car for sale let me know. Or if not for sale at least send me pics and and end my suffering, if only temporarily. Eric eschroeder1@austin.rr.com

There are few things that I regret doing in life and that is getting rid of my 1971 Demon 340 4sp that I had in high school. Looking to relive those days. If anyone has a complete one they are willing to sell, or if not, just willing to send me pics of yours, please relieve my suffering...