Search results for query: *

Before you chastise me hear me out. Right now i,m tapped out. Wife had hernia surgery and crappy insurance left me a hefty bill to pay so no car bucks. I have a 750 proform mechanical secondary carb thats almost new. I want to try and use it to get by for now. I stuck .067 jets in front and a...

Not really a 2bbl guy so looking for some info.Narrowed it down to this being a Carter BBD but cant find the right numbers to match a kit. Not sure what its originally off of either. Numbers are 0-2258.Any help with which kit to order will be appreciated.

Whats you guys opinion on the best tuning and modifying Holleys book?. Need to have a lot of Dominator info not just 4150 stuff.

Any one here good on tuning Dominators. I have an 1150 on my 500 and wide open its bad *** but around town it loads up and stumbles. I think restrictors in the intermediate and bigger air bleeds are the way to go and was wondering where to get the restrictors. Summit sells the air bleeds and...

When I go to start my 01 cummins it cranks forever before it hits and runs. i believe i have a injector line leaking and letting air in the system when it sits.Can I use air and pressure up the line at the filter and spray soapy water around the injectors and look for bubbles or is there another...

I have a dilema. I cant figure out which carb I want to use. The Newer Dominator is race prepped with aed linkage and stage 2 prep from diamondback. The older one with orange metering blocks works fine but is,nt as trick as the newer one. I really like the old school cloverleaf velocity stacks...

I bought a used 1150 dominator and dissassembled it and powdercoated the main body metering blocks and float bowls. Now that i,m trying to install it it keeps pouring gas into the intake from the front barrels. I,ve tried float level adjustment and it seems as though the metering blocks are the...

looking for info. white pages, tuning ,schematics ,trouble shooting and tuning. doing my own so post anything helpful

im running a comp 140 pump with a comp 140 filter in between the tank and pump. the canister filter has two in and two out ports. does anyone see a problem if i run the regulator return line back to the filters second inlet since its before the pump. I had to adda 1/2 inch pickup on my tank and...

Going to use a dominator on an m1 with a 2 inch spacer and need to fab a throttle bracket so i,m looking for pics for an idea as i,m working with a blank slate. does a stock pedal linkage and cable have enough travel for a dominator? heres a pic of what im working with. i have some aluminum...