Search results for query: *

I'm planning to order a new cam today and I'm still undecided which I should go with. I have a 383 that is 30 over, rods and mains are 10 over. Pistons are flat tops I don't know much else about them. Stock closed chambered heads with headers, RPM intake, 700 holley and pertronix distributor...

Over the weekend, I built a pushrod length checker & solid lifter from an old pushrod and hyd lifter. I installed my 1.5 crane roller rockers on my stock 383 heads with a .019 steel shim head gasket. I proceeded to check the length by marking the valve tip, adjusting the rocker so 1-2...

I bought a complete 383 which is believed to have come from a 65' Polara. I tore the top end down for inspection and a cam\lifter swap. When I look down inside the lifter valley, I can see the ends of the counter weights on the crank have all been machined. They are flat with machined grooves...

I have been searching like mad, the more I search the more I confused I get. Here is my situation, I swapped a 383 in place of my /6 in my 67' dart. Everything seemed ok until I installed the TTI headers. It looks like I will have a slight very slight interference with the centerlink and...