Search results for query: *

I changed out the wiring on my 71 demon 340 with M&H factory style harness from YR1. I recently got the factory 71 idle solenoid rebuilt/refurbished and want to install but I do not see a wiring harness for it or wire from the main harness? The FSM shows a dark blue wire going to the ballast if...

71 Demon - ALL new wiring; under dash, column, engine etc and NOS horn relay. Horns had been working - Prestolite pair that I had the powder coater PAINT and not powder coat due to the heat. Horns stopped working, checked fuses - all good. Standard base steering wheel - push the button and...

I see now that the voltage regulators now are no longer stenciled and have a cheap sticker with the part number and date code. Is there any other options for these? Is anyone rebuilding old vintage ones? Thanks!

I had to replace the pigtail connectors for both front turn signals on my 71 Demon. Both of the separate ground wires were missing on the old ones. I'm not seeing where the ground wire with the eyelet grounds to for the new connectors. I just did not want to drill a hole and screw it into...

Just had my 71 motor rebuilt - and I didn't recall this small harness on the motor when I sent it in; 71 Demon 340-4spd. Looked in my new 71 chassis manual and FSM and can't decipher where this plug goes to? I don't seen anything on the current engine harness, but its been spliced a hundred...

Re wiring the Demon with M&H harness, and the original 5 wire ignition switch is being changed out as well as the ignition switch harness was cut. While in the column, I noticed the key buzzer harness (two red wires) was also cut. Where does the two plug buzzer harness connect to please? I did...