Search results for query: *

Looking for a very nice pair of 625 cfm Carter AFB carburetors. MUST be clean and very nice condition and without damage/modifcations. If you have something as described, please pm me here, thanks...wb

Looking for a nice pair of Carter 9625/9626 or 9635/9636 Carter AFB carburetors. No corrosion or nasty carbs, must be decent with no damage or broken parts. If the plating on the linkage pieces is good, that's a big plus but rusty linkage is unacceptable, they must be void of all rust/corrosion...

Looking for a set of PEP 6.76 I-beam connecting rods with std 2.5 Chrysler journal bore and .990" pin bushings. PM me if you have something, thanks...wb

I'm looking for very good condition satin finish only, 15x10 with 4-1/2" backspace. Please, no Centerlines, Super Tricks only. If you have something PM me here, thanks...wb

Looking for a QUICKTIME RM-6078 or 6073 bellhousing for a B/RB/426H, can be used but undamaged and no modifications. PM me here if you have something, thanks!

Looking to purchase an Edelbrock 383 6 pk intake manifolds (P4529055), nothing hacked or modified. PM me here if you have something I might be interested in, thanks!

Looking for a Quicktime bellhousing (rm-6073/6078) for big block Chrysler (383-440-426H) engines, for 130T flywheel and chrysler starters, new or used. PLEASE, pm me here, thanks!

Looking for 4.350-4.380 x .017-.020" shim head gaskets for the B-engine family. NOT the larger 4.440" bore but the smaller bore shim gaskets (361-383-426W). If you have any of the P4286754 sets, that's better. PM me here if you have something, thanks...wb

I'm in need of a decent unrotted K-member with steering mount intact, it doesn't matter what engine brackets are in as they'll be cut out. If you have something within 150 miles of Savannah, Tenn, and cheap drop me a line/PM me here, thanks!

Looking to purchase an undamaged Quicktime RM-6078 big block bellhousing for Jerico transmission. If you have one and have no use pm me here, thanks!

Looking for a decent '67 B'cuda coupe or '67 Valiant 2 dr sedan, must have: good brightwork (grilles, bumpers, rear finish panel, tail lights, etc), glass, dash/instrument cluster and core interior parts. Body needs to be rust-free and decent...no bondo buggies, no rust buckets or cars beat up...

Looking for a verey good condition SW 9000 rpm mechanical tachometer as the one shown. MUST be in excellent to new condition, no damage/rust/wear/etc. If you have something as-described, please PM me here, thanks...wb

Looking for a 1963 Plymouth Savoy 2 dr sedan, no wrecks, rust buckets or bondo buggies! Body must be complete, intact and fairly rust-free...some floor repair is okay but no major body sheet metal replacement, (IE: quarter panels/roof/etc). The 3rd pedal would be a plus, yes it would be nice if...

Looking for a matched set of Cragar super tricks in 15x10 size, prefer 4-1/2" to 5" rear spacing, 4-1/2. 4-3/4 or 5 bolt pattern. Must be very nice SATIN finished (no polished units) condition and not over-priced! If you have something of interest, please PM me here. thanks...

Still looking for good/undamaged '68-'71 standard bore 383 blocks and good/undamaged 383 forged crankshafts...within 250 mile radius od Savannah, Tenn. IF you have something of this nature, by-all-means PM me here...thanks!

Looking for an Edelbrock 7186 intake in very nice to excellent condition, no mods, no stains, PM me here if you have something you think I might be interested in, THANKS!

Looking to purchase a Carter AFB 9755/6/7 in very good condition, no rust or corrosion on the plated parts, semi-shiney body pieces and complete with NO modifications. If you have something of this nature, please PM me here, thanks..

I am still looking for std bore 68-71 383 bare blocks, with or without main caps. Other than normal wear, no damage. PM me here if you have something I may be interested in within 230 miles of Savannah, Tenn. Thanks...wb

WTB, 67-71 383 Chrysler blocks and forged crankshafts. Anybody within a 200 mile radius of Savannah, Tennessee or in the Memphis area that has any good cores they want to sell, drop me a pm here, thanks...

WTB, quicktime bellhousing for BBM and Jerico transmission. PM me here if you have something, thanks...

Looking to purchase an Edelbrock 7186, Perf RPM for low deck B-engine. Used is fine as long as it's not modified. If you have something like this, PM me here, Thanks...

Looking to purchase a 9000 rpm Stewart Warner mechanical tach. PM me here if you have something in excellent condition, thanks...

Looking for a decent-bodied 67/8 Barracuda fastback for a drag race project. Nothing fancy, nothing complete, preferably a rust-free (or close to it) roller. MUST have decent brightwork, good grilles, tail lights and rear finish panel trim, interior isn't real important but must have dash, kick...

WTB, 67-71 383 Chrysler blocks and forged crankshafts. Anybody within a 200 mile radius of Savannah, Tennessee or in the Memphis area that has any good cores they want to sell, drop me a pm here, thanks...

Looking for a Quicktime bellhousing kit for Big Block Chrysler engines. New or used matters not, just not rusted or beat-up. RM-6073 (A833) or RM-6078 (Jerico). If you have something, drop me a PM here, thanks...wb

Looking for an Edelbrock 7186 Performer RPM intake manifold for 383-400 low deck Chrysler engines, cash OR trade for equal condition Holley Street Dominator. PM me here if you've got something of interest, thanks...wb

Looking for a good 68/9 383 block (block only) at a reasonable price or trade for a 68 HP 440 block. The 440 has been bored and honed with BHJ plate however the owner let it set w/o oiling it so it needs to be re-honed. PM me here if you have somethin g of interest. Located in Savannah, Tn...

Looking to buy a Quicktime RM-6078 bellhousing for B-RB engine to a Jerico DR4 transmission. PM me here if you have one you'd like to sell, thanks!

Unmolested/unmodified low deck M1 single plane intake manifold for 383-400. If you have something I might be interested in, pm me here...thanks!

Looking for very good grilles, bezels, side markers, tail lights for a '68 B'cuda at a reasonable price. If you have something I might be interested in, please pm me here...thanks!