Search results for query: *

Looking for driver side floorpan. Do not need a full pan, just the front section around the gas pedal and e-brake area would be enough. As well as passenger side kickpanel/corner area sheetmetal. Could use smaller pieces just to save some time, see pics. Thank you FABO.

Horn ring. I'll check the part # on mine. White radio knobs. Should look the same as Lights and Wipers knobs. Signet 200 emblem, 1 or a pair. Lower fender patch panels.

Looking for 3 packs of 4 lug nuts. If I'm correct, should fit old Cragar 15x6, 5 on 4.5 wheels. Cragar 27780-4 Cragar Wheel Lug Nuts | Summit Racing

My headliner is perfect, er, was perfect until I forgot to put the piece of 2x4 cedar that has kept rodents out for decades in the car. Anyhow, anyone replace their black headliner and have an entire section without rips or holes? Thank you fabo.

67, manual steering, 4 speed. Looking for lower inner shaft, not worn like mine, and upper column piece, not deformed by a hose clamp tach installation. See pics. Would consider complete column in vgc or possibly other parts.

Looking for 1. I know a member reproduces however not the same as what I have, and obviously I know what bolt size to use as a replacement. Just throwing this out there to see if it sticks. My brackets have a raised groove, and the bolt has an inset groove under the head. Bolt also has groves...

Front splash shields, plastic, 2800658 and 2800659. Fender to inner fender brace and hardware, driver's side. Pics show missing driver side and passenger side. Could use passenger hardware if unique, and confirmation that the passenger bracket I have is correct. Spare tire hold down hardware...

Got this one, looking for 1 more in similar condition. Center is in vgc, rim has rust. 14x6, looks like just shy of 3.75 backspace, direct bolt, sbp.

Looking for 2 small bolt pattern old school style wheels. Nothing larger than 15" as I have 15x8 sbp on the rear. Let me know what you have, size, backspace, etc. I have a few sbp mags/rims, but looking for something other than Cragars, chrome reverse, or my beat up Keystones. Something...

Sometimes the stamped # is covered by the welds. Just looking for the chrome stick, not the entire shifter mechanism. I see the stick with mechanism on ebag from time to time, but too rich for me. Long shot, maybe, but nothing ventured. Closest shifter that matches, Indy.

Yes, a Cragar Sparkler. I have 1, figured I'd look for another. This is not a GT or a regular full chrome Cragar. I cleaned up a small area on mine to show the coloring better. Mine is a dirty, slightly rusty, 14x6 BBP. Idealy, another same size, in roughly the same condition. Would consider...

In Albany NY area, looking for a running 383, nearby where I can pick up, or whole car with good engine.

Looking for a running 318 poly, nearby where I can pick up. Probably a long shot, but worth a try. Engine found and bought! Can delete if needed.

67 a-body Sure Grip in need of parking brake hardware: the lever, the strut, and the spring-Both sides. I have new cables.

Anyone got a used Edelbrock Performer RPM for a 383 at a decent price?

Looking for a few parts: Fan shroud: 2785312 Dipstick for 383: 2899046 tube, 2899411 stick Alternator: date coded prior to May 25, 1967, single groove Radio delete plate: original, (have repro) Inland shifter: for a bench seat, any info on this shifter, part number, pics, would be...

Anyone have one? I have a reproduction plate, I hate it, first pic The second pic below is the correct plate. Technically not a radio delete as any radio was an option in 67, but who cares, people like to say 'radio delete.'

Does anyone have the one in the white square that they could get to me asap? The pic is from eBay, but it should be the correct one I need. Passenger side, marked on the bulkhead as: VUTS WXYZ The "Z" connection has a fusible link shoved into it. The plastic itself does not appear to be...

1 heater hose bracket. 1 headlight ring. 1 door window crank, (would take 2). 1 fastback dome light, (would take 2). Not looking to break the bank, used is great.

I need 1 of these, see pic. I have 1 Dodge mag hubcap that I would trade, it is in vgc.

Anyone have 2 or 4 of these rims?

Nuff said- pm me with what you have. Thank you FABO.

Does anyone have 4 of these?

Does anyone know where I can get a new one? Or does anyone have a really good used one? Year One lists them, but it is always 6-8 weeks away and that never comes.

Does anyone have a 1967 120 or 150 speedo face that is in excellent condition? I only need the face, so if you have a speedo that is shot except for the face let me know. The numbers look like this:

There was an unfortunate incident and my uncut, unbroken, dash bezel has been destroyed. I'm sick about it and I need to go break something... At this point finding one is nearly impossible as the 67 bezel is one year only, (the radio is not a thumbwheel, no lighter, etc). All I need is...

For a 67 Barracuda. Repros on eBay are $50, does anyone have one or know another source?

These are the air foil, or air deflector wipers, 15". I do not need the arms, just the wipers and blades. Looking for a good, clean set. The pic is not the best but it is the only one I have.

Looking for a complete uncut under hood wiring for the engine temp, coil, starter relay, etc, from the bulkhead. Could also use uncut wiper motor wiring.

I need the wire that goes from the radio to the speaker in a 67 Barracuda. The connections on either side are specific, but I am not sure what, if any, years that interchange.