Search results for query: *

More polls :popcorn:

I'm curious how many are on here and could use some motivational pictures.

1969 Dart 360, ede heads, air gap, h116 speed pros, scat i beams, stock crank, 60403 voodoo cam, holley 750dp, 273 adj iron rockers, d453's, msd 6al, accel 59301 dizzy. I had made the swap to a 4 speed a few years ago and swapped back to an automatic due to a demonized oil leak. With the...

just stiring the pot to see what everyone's using. Feel free and share your combos. (Engine,clutch,bell housing,cam,gears,etc)

Is it possible? I have room in the crank pilot hole. It would put the shifter in a more favorable location. The trans crossmember bolts would line up better. I would have to fab up a removable cover. Only issue I can think of is bolting up the starter/starter engagement. Reason being I've had...

Just switched to a t-handle (like the line lock button) have to say I like it a lot better than the ball shifter.

I am working on getting the z bar where it should be and just ordered some parts from brewers. I had the car on the hoist at work on my lunch break. It looks like the ball stud bracket needs to be just short of 1/2" forward. (towards engine) I ordered a ball stud that can just be welded to 1/4...

spring in the hub not correct? Reverse shaft not in far enough?

I have another thread started with the rest of the build. Link below. Got the transmission apart and found some issues.

I have a 1968 a833 4 speed that has the early style synchro's. I was told the later style is better. Was wondering if the a833od tranny synchros would be the ones to use and if they would work? also I have brass shift forks. would the steel shift forks from a OD tranny work in my trans...

I'm looking to purchase this shifter. It was suppose to be used on a 72 satellite. Will it work on my dart? Thanks

One on Ebay didnt even know you could order a 4 speed GT. Anybody ever seen one? http://cgi.ebay.com/ebaymotors/1969-DODGE-DART-GT-/121086444815?pt=US_Cars_Trucks&hash=item1c3150850f

How clumsy is the council shifter compared to non concil. Plan to race the car a few times a year after I make the swap. Is the top plate the only difference?

69 Dart 4 speed hole location. Anybody have measurements of where it should be? I don't have all the parts for the 4 speed yet. I have the floors pans cut out and would like to weld in the 4 speed hump. Plan on using the 727 until I have everything for the swap. Or how to use the parts I...

68 A833 :burnout:Pics are on the way. Will need everything else (pedals, linkage, shifter, floor hump, etc)

I have a 400+ hp 360 with a 727, 2800 converter, turbo action full manual valve body, B&M ratchet shifter, 8 3/4 3.91 suregrip. A buddy of mine located a a833 4 speed from a 68 dart 318 car. The guy wanted $400 for what I thought was everything. Turns out 400 bought the just the trans...

I have a 69 dart 360 727 8 3/4 3.91 420hp I planned on rebuilding a 727 this winter and buying a different converter but thinking a 4 speed with overdrive would be a lot more fun. (drive it to the track) I get to the strip about three times a year but plan on moving closer in the next few...

1. Can I use the bell housing from a 6 cyl od 833 on my 69 dart 360 finally found a sight that said it wont work What kind of car could i get a small block bell housing that will fit an overdrive case