Search results for query: *

I'd appreciate any suggestions. Thanks.

I rebuilt the front end on my '71 Dart Swinger. Got everything back together and the 3-spoke steering wheel seems upside down to me. Seems it would be easier to read the instruments if one spoke was pointed down instead of straight up. Will the steering wheel spline allow it to be rotated 180...

I'm about to relocate my springs inboard and wondered about moving the rear back at the same time to facilitate tire fitment. Found TheSuspensionKing.com on the net and notice the 66-72 Coronet spring center bolt is an inch more toward the back. The spring is also an inch longer but the rear...

Removed UCA bushings some time ago and am installing new ones now. There's a sleeve that presses on the backside of one of the bushings presumably to lock it in place more securely. I don't remember if the sleeve is for the bushing toward the front or rear of the car. Anyone know?

I like OEM Upper Control arms to avoid bump stop and BJ rubber boot issues of after market parts so decided to modify stock UCAs to get more caster. First, I made a jig to hold the arms by the bushing holes and allow the arm to meet a flat plate where I could scribe a circle indicating where...

I came up with this to remove ball joints from upper control arms that are off the car... Weld a pipe to 2"x2" square tubing (I had 1"x2" so stacked two together), shove it into your vehicle's reciever hitch, use the special socket and a long cheater bar and off you go. Note the added stop to...

Anyone know if a '66 Dart upper control arm will interchange with '71 Dart?