Search results for query: *

I have for sale an excellent pair of used rear SBP, 10 x 1 ¾ brake drums that came from a 69 Barracuda using the 8 3/4" rear axle. These drums were the spares for the car in case they were needed. They have never been cut and just show normal wear. I measured approximately 10” in diameter with...

I have for sale a complete, used set of SBP, 10 x 1 ¾ brake drums, shoes with all the attaching hardware along with the backing plates that came from a 69 Barracuda. They are all in excellent shape with the drums never been cut. I would like to get $60.00 for the brake parts everything plus...

SOLD pending receipt of payment. I have for sale a pair of used vented Kelsey Hayes SBP front rotors (no hubs) that came from a 1969 Barracuda. They are used but in excellent shape and have never been cut. They measure 20.574 mm thick with a 20.06 mm minimum thickness. I would like to get $30...

SOLD pending receipt of payment. I have for sale a pair of NEW, never installed 10 X 1 ¾” rear brake shoes. These shoes were originally purchased through Firm Feel back in 2013 but I think they no longer supply them...

I have for sale a pair of NEW, never installed 10” brake drums for the SBP 8 ¾ axles. They use the 2 ¼” brake shoes. https://www.autozone.com/brakes-and-traction-control/brake-drum-front/p/duralast-brake-drum-8754/716241_0_0 The fit the 67-72 A-body cars. I would like to get $50.00 for the...

I have for sale a set of 10 used axle bearing retaining plate nuts. All are the 3/8-24 fine thread design. 9 nuts are regular hex head while the 10th nut has the integral shoulder washer for locking down the axle end play locking tab. Unfortunately, I don’t have that tab. I would like to get...

I have for sale an excellent pair of used 002/003 Super Stock springs, OEM front hangers, aluminum front eye bushings (both with the ½” bolt), spring perch U-bolts and nuts and the rear shackles with new OEM type rubber bushings, along with the OEM shackle attaching brackets and bolts. Mopar...

SOLD pending receipt of payment. I have for sale a single used torsion bar adjuster setup for any of the A, B, or E body cars. This particular one came from a 1972 340 Challenger. It looks to be in great shape with all the threads really nice. It’s clean and ready to install. I would like to...

I have for sale a pair of used Competition Engineering rear drag shocks that came from my 1971 Dodge Demon drag car equipped with the MP rear super stock springs. I replaced them as part of my preventative maintenance program as I do with various other components on the car. There are absolutely...

I have for sale a very little used aluminum housing master cylinder. Dorman P/N M99294. This master cylinder is in excellent shape, is clean, was bench tested and works perfectly. Dorman M99294 Dorman Brake Master Cylinders | Summit Racing It has the 1.031” bore and fits many Dodge, Plymouth...

I have for sale a pair of new front leaf spring bushings that I just removed from a pair of MP super stock springs, 002/003. The springs were never installed so the bushings just have marks on them for when I pressed them out of the front spring eye. They fit the 1962-1974 Dodge/Plymouth A, B, &...

I have for sale a pair of used Competition Engineering rear drag shocks that came from my 1971 Dodge Demon drag car equipped with the MP rear super stock springs. I replaced them as part of my preventative maintenance program as I do with various other components on the car. There are absolutely...

I have for sale a power steering pump pulley that is in excellent shape, has been cleaned and painted and has no damage that I can see. This is the design that uses the keyway which is also included. The pulley measures 5 3/8” in diameter from edge to edge and 1 7/16” deep with the center hole...

I have for sale a set of 4 used Mopar Performance rear U-bolts and nuts, P/NP4120611. They are for the rear housings that have 3” tubes: 8 ¾, 8 ¼”, Dana 60 and 9 ¼” housings. These U-bolts are in decent shape, have been cleaned and the threads on the U-bolts and nuts chased so they thread...

I have for sale some A, B, and E body, of various years, parking brake cable parts. Some clips, connectors and a hooked rod. They all appear to be in good shape and are very use-able. I would like to get $4.00 for everything plus the shipping. Ken Edison, NJ

I have for sale a complete set of 20 open end lug nuts and washers for ½” – 20 RH thread studs. They were use on Weld ProStar wheels. They have 1.375” shank length and .687” shank diameter. They are Weld P/N 601-1426. Weld Racing 601-1426: Chrome Mag Shank Lug Nuts 1/2" x 20 RH Open End - JEGS...

I have for sale a pair of excellent 002/003 MP super stock springs. These came on a 72 Duster parts car project that we bought a while ago to get the narrowed 8 ¾ rear. Mopar Performance P3412002 Mopar Performance Competition Leaf Springs | Summit Racing Mopar Performance P3412003 Mopar...

I have for sale a pair of New rubber front leaf spring eye bushings with a 1.5” inside diameter. They are the OEM rubber bushings that were pushed out of a set of new MP super stock springs. These bushings will fit any application with the 1.5” diameter front eye with a 5/8” diameter bolt. 1960...

I have for sale some A, B, and E body, of various years, parking brake cable parts. Some clips, connectors and a hooked rod. They all appear to be in good shape and are very use-able. I would like to get $6.00 for everything plus the shipping. Ken Edison, NJ

Sale pending receipt of payment. I have for sale a set of 4 straight chrome metal tire valves. These are required as per the NHRA rules for valve stems. These are still in its original unopened packaging. They are Mr. Gasket P/N 1957. According to the specs, they fit wheel holes of .453”. Mr...

I have for sale a pair of new front sway bar end links for the 65-77 A and B body cars. These are new Moog #K8266 but for whatever reason, 3 of the rubber bushings are on vacation and can’t be found. Included are the two 7 3/8” long bolts and nuts, two 2 ¾” sleeves, 4 washers and the single...

I have for sale a power steering pump pulley that is in excellent shape, has been cleaned and painted and has no damage that I can see. This is the design that uses the keyway which is also included. The pulley measures 5 3/8” in diameter from edge to edge and 1 7/16” deep with the center hole...

I have for sale a new drum brake residual pressure valve from Master Power Brakes. This valve is used to prevent long pedal travel when applying the brakes on a drum brake application. It acts like a one-way valve (check valve) to maintain brake system pressure and will also eliminate a spongy...

I have for sale a set of 6 OEM rear axle U-bolt nuts that are in decent shape and have been cleaned. These are just the nuts and only 6 of them. I would like to get $5.00 for all 6 plus the shipping. Ken Edison, NJ

I have for sale a single used Hoosier 30.0/9.0R-15 radial drag slick with the C07 compound and a 92.5” circumference. The mate to this tire was cut so this single tire is up for sale. Maybe it can be used as a spare. The inside sidewall shows some rubbing from the leaf spring but is definitely...

I have for sale a manual steering box that came from a 68 Dart GTS. This is not the original box from this car. At some point, many years ago, it put used to replace the P/S setup. This box is being sold as a rebuildable care as the sector shaft and steering shaft seals are leaking because gear...

I have for sale a pair of OEM front strut rods that came from a 68 Dart GTS. These are the ones with the coarse threads on the bushing end but they will fit any of the 67-76 A-body cars. The overall length is 21 ½” and the dimension from the outer lip edges is 16 5/8”. They appear to be...

I have for sale a set of drag slick rim screws that hold your wheels to your drag slicks. These are grade 8 material and have a gold iridited finish. These are the same as the Moroso P/N 90100. The only problem with this set is that I only have 19 of them, so to put 5 screws on each rim, inside...

SOLD pending receipt of payment. One is sold. I have for sale 2 used OEM “V” style rear flex hose brass brake line tees for the rear housings. They fit the 1971 and newer models. They are in great shape, have been cleaned and have no issues. These have the curved indentation on the housing tube...

I have for sale a pair of new Sealed Power inner wheel bearings P/N F-LM102949. They fit the 1983-2007 Ram 1500, Ram 50, Dakota and may other models. Timken LM102949 Timken Wheel Bearings | Summit Racing These are just the bearings, I don’t have the races. I would like to get $6.00 for the...