First want to show a great product most folks could probably use, I'm glad these are reproduced my originals were crumbling:
These are the part numbers for the column, application is supposed to be 70-76 A-body, but on their catalog page it says also fits 64-69 Barracuda.
I bought FR21028PBK and had them add the laser cut to make the column collapsible.
I also had them substitute the correct 11/16"-36 to 3/4" DD u-joint I needed for my Borgeson steering box.
Column is their slip shaft direct fit style.
Here is my new column bolted to the factory mounting bracket:
Mounted in place, the shaft is obviously a bit long.
Here is my 16 year old son cutting 7-3/4" off the end.
Here it is after
And it fits!
This is the floor mount piece they sell:
With the "old" dash and "old" pads mocked up:
They also sell an adapter that allows you to mount a Tuff wheel:
Here it is installed:
New dash cluster and bezel if you have not seen them:
(more info here 1968 Barracuda Gauge Cluster)
Just FYI - they sell an aftermarket piece that goes under the column to cover the bottom, the piece they sell says it fits 67-69 A-bodies.
It does not fit a '68!!! '68 style is on the left, aftermarket piece on the right. The '68 has to be different because of the lower dash pads.
I sent it back...