030 440 eng. complete street/strip

-
Status
Not open for further replies.
D

dart540

Well-Known Member
Joined
Oct 25, 2007
Messages
969
Reaction score
79
Location
south western PA.
Rating - 66.7%
6   3   0
Contact seller
Used rebuilt 030 440 street/strip eng. only 9 runs
Stage 6 alum. head
M-1 alum. manifold w/ 4500 top
Eagle Rods
11 1/2 pistons / stock crank
Comp Cam solid
Fluidampr
Mildon deep oil pan
H/V oil pump
MSD dist/Holley 1050 carb w/Billet metering blocks
oil pan to carb can here run.
$5500 PM for pics/information

Thanks Stan

7150753-P1010027_320x240.JPG
 
No has not been dynoed just had it at the track one time ran a 10.70 with wrong timing and valves were out of adjustment.I'm wating to get back to track to see what it will do.
 
The car weight is #3100 without me in there and add me your looking at #3342.The duster is just back-haved with a ladder bar coil over set-up.The duster 60 fts are low 150 so i'm finishing up a rollized trans with a low gear set to see how much it changes my 60 ft times.Stay tuned will let you know in a couple weeks.
 
RyanUpdike70 said:
OK thanks my duster is basically setup the same way looking to build me a motor to run in the tens and be a street car
Click to expand...
WELL sir this your motor..you aren't going to build one any better top to bottom for the price.and yes I have run stuff like it on the street with a 4800 stall converter.I just wish there was something like this before I did mine.........Artie:banghead:
 
godfatherofchry said:
WELL sir this your motor..you aren't going to build one any better top to bottom for the price.and yes I have run stuff like it on the street with a 4800 stall converter.I just wish there was something like this before I did mine.........Artie:banghead:
Click to expand...


I was just thinking the same thing for a friend of mine...lol
 
Status
Not open for further replies.
-

Back
Top