[SOLD] .030 standard rebuild kit

[memike]

Here before E-Bag
complete with rings, lifters, pistons and oil pump and gaskets.
Standard Cam, no timing chain or gears ](*,)

Everything you see $130 should be a more then far price for our members here plus the ride :toothy9:

Pay pal or money order workd for me :hello2:
If anyone is looking to rebuild a 318 and go .030 over this is a good deal.

Thank you fabo, Looking to go to Indy and selling a few things :cheers:

 

[Snake]

Thats a very good deal good luck with the sale.

 

[CUDACOX]

Here before E-Bag
complete with rings, lifters, pistons and oil pump and gaskets.
Standard Cam, no timing chain or gears ](*,)

Everything you see $130 should be a more then far price for our members here plus the ride :toothy9:

Pay pal or money order workd for me :hello2:
If anyone is looking to rebuild a 318 and go .030 over this is a good deal.

Thank you fabo, Looking to go to Indy and selling a few things :cheers:

P.M. Sent

 

[memike]

Pm returned I will take a couple more pictures real quick this morning for everyone

 

[memike]

I am sure all these need is soaked and cleaned to be installed, looks like some very small amount of moisture found it's way to the small lifter boxes.
Here is a beter picture of the complete gasket kit.

 

[TheWolfman]

what are the cam specs?

 

[memike]

what are the cam specs?

Here you go theWolfman and welcome to this great site if I missed you in the welcome wagon thread :hello2:

 

[TheWolfman]

Here you go theWolfman and welcome to this great site if I missed you in the welcome wagon thread :hello2:

okay i feel like an idiot, completely glanced past that haha

 

[krazykuda]

I believe (from old memory) the old 318 stock cams are 248 duration and .399 lift. if this is the stock one. There were a couple of different grinds for the 318. One only had 240 duration.

Hello wolfman, we got to get together sometime...

Great deal memike, I don't have a 030 over 318 or I'd buy it...

 

[TheWolfman]

I believe (from old memory) the old 318 stock cams are 248 duration and .399 lift. if this is the stock one. There were a couple of different grinds for the 318. One only had 240 duration.

Hello wolfman, we got to get together sometime...

yes we do, at the moment im scroungin pennies to finish my car haha

 

[memike]

I believe (from old memory) the old 318 stock cams are 248 duration and .399 lift. if this is the stock one. There were a couple of different grinds for the 318. One only had 240 duration.

Hello wolfman, we got to get together sometime...

Great deal memike, I don't have a 030 over 318 or I'd buy it...

Thank you krazykuda

yes we do, at the moment im scroungin pennies to finish my car haha

I will consider trades, I do need an Eddy 600 for my ramcharger and or a nice breather and valve cover set But would rather sell..


I will lower my price $110 plus shipping, heck the pistons alone are well worth that for some one building a 318. and the gasket set and oil pump will go a long way on any small block build I believe .
I will be shinning and organizing this kit up for nicer pictures and put this kit on e-bag Saturday :hello2:

Thank you fabo
Opp's :banghead: Looks like I jumped the gun and did not wait on my 3rd day to change my original first post.

 

[krazykuda]

From the melling site, the cam is the 75-84 cam. I don't have time to look up right now, but will try to find my 75 service manual later.

 

[TheWolfman]

Thank you krazykuda



I will consider trades, I do need an Eddy 600 for my ramcharger and or a nice breather and valve cover set But would rather sell..


I will lower my price $110 plus shipping, heck the pistons alone are well worth that for some one building a 318. and the gasket set and oil pump will go a long way on any small block build I believe .
I will be shinning and organizing this kit up for nicer pictures and put this kit on e-bag Saturday :hello2:

Thank you fabo
Opp's :banghead: Looks like I jumped the gun and did not wait on my 3rd day to change my original first post.

i have a carter 600cfm carb and a stock valve cover set with the oil fill/breather are you interested in that for a trade?

i've been eyeing this because its a great deal i just don't have the cash or especially the extra dough afterwards to get the block bored out

 

[krazykuda]

From the melling site, the cam is the 75-84 cam. I don't have time to look up right now, but will try to find my 75 service manual later.

OK. From the 75 Mopar Service Manual the stock 318 cam is:

240/248 dur
26° overlap
.373/.400 lift

 

[64 SRT8 Dart]

PM Sent.

 

[memike]

i have a carter 600cfm carb and a stock valve cover set with the oil fill/breather are you interested in that for a trade?


i've been eyeing this because its a great deal i just don't have the cash or especially the extra dough afterwards to get the block bored out

I would rather sell and I was looking for aluminum VC's, I have 2 sets of stock VC Wolfman, and on the carb I was hopping on a newer Eddy 600.
Thank you for your time and I have a buyer that has cash that I need worse then anything at this time. Have you posted in the parts needed thread :coffee2: There could be a member that has what you ar looking for and would or could do a trade with you on something

PM Sent.

I got your pm :hello2: and a good tech could answer your questions
But I woke up this morning and I have a member that wants this kit.
One thing I have learned here is if I need a part there are many members that keep an eye on the parts need thread 64 SRT8 Dart :cheers:
It has help me find parts quickly.

 

[memike]

No Biggie.

 

[memike]

voodoo1 will not reply after he said he what's this kit.... No Biggie..

 

[memike]

PM Sent.

Thank you 64 SRT8 Dart, Pm and shipping cost sent.

SOLD, to the prompt member here, Thank you 64 SRT8 Dart. :hello2:

 

[memike]

Fallow up post for 64 SRT8 Dart, Yes I think when buiness is being dun this is the way to follow up....

 

[memike]

I do this to everything I sell to show packing and it makes the customer happy :cheers: keeping them updated is fun and we all learn from it This is sold and I need to mark it as sold, I need to learn how to do that now