[Found!] 1.03"+ torsion bars.

-
Status
Not open for further replies.
75slant6

75slant6

FABO Gold Member
FABO Gold Member
Joined
May 15, 2011
Messages
6,394
Reaction score
3,198
Location
Russellville, ky
Rating - 100%
14   0   0
Contact seller
I'm planning to upgrade my torsion bars before too long and am/was planning to get 1.03" PST bars but figured I'd check to see if anyone on here has a set of 1.03, 1.06 or 1.12 bars they'd like to get rid of. Thanks
 
I have a set of PST bars, I will have to find them, I think they are the 1.03
Will let you know later
 
I have a set of original MoPar Nascar 1.58 bars, good for a hemi car at Daytona. I'll be upgrading in a while, so they will be up for grabs.
 
odcics2 said:
I have a set of original MoPar Nascar 1.58 bars, good for a hemi car at Daytona. I'll be upgrading in a while, so they will be up for grabs.
Click to expand...
You sure they're 1.58"?? That seems incredibly huge. Not even sure that would fit through the socket in the transmission crossmember
 
75slant6 said:
You sure they're 1.58"?? That seems incredibly huge. Not even sure that would fit through the socket in the transmission crossmember
Click to expand...

That's what the mic says... They take "C" body anchors in both ends.
 
No problem. Unless you have a the weight of a hemi in that car, it'll ride pretty rough with those 1.03 "toothpick" bars in it anyways! =) Good luck.
 
These are what I have.

torsion.jpg
 
Status
Not open for further replies.
-

Back
Top