[Found!] 1.03"+ torsion bars.

[75slant6]

I'm planning to upgrade my torsion bars before too long and am/was planning to get 1.03" PST bars but figured I'd check to see if anyone on here has a set of 1.03, 1.06 or 1.12 bars they'd like to get rid of. Thanks

 

[Steven190]

I have a set of PST bars, I will have to find them, I think they are the 1.03
Will let you know later

 

[odcics2]

I have a set of original MoPar Nascar 1.58 bars, good for a hemi car at Daytona. I'll be upgrading in a while, so they will be up for grabs.

 

[75slant6]

I have a set of original MoPar Nascar 1.58 bars, good for a hemi car at Daytona. I'll be upgrading in a while, so they will be up for grabs.

You sure they're 1.58"?? That seems incredibly huge. Not even sure that would fit through the socket in the transmission crossmember

 

[odcics2]

You sure they're 1.58"?? That seems incredibly huge. Not even sure that would fit through the socket in the transmission crossmember

That's what the mic says... They take "C" body anchors in both ends.

 

[75slant6]

That's what the mic says... They take "C" body anchors in both ends.

Gotcha. Yea those are gonna be way too stiff for what I want. Thanks though.

 

[odcics2]

No problem. Unless you have a the weight of a hemi in that car, it'll ride pretty rough with those 1.03 "toothpick" bars in it anyways! =) Good luck.

 

[75slant6]

Still lookin

 

[gerty]

Still lookin

Pm sent

 

[gerty]

These are what I have.