[WANTED] 10" X 2.5" Backing plates for 73 Challenger 8 3/4 Rear end - Where to buy?

[R68DartGT]

Hi anyone know where I can buy a new or barely used 10" X 2.5" Backing plates for a 8 3/4 rear end - Big bolt pattern? Looking for the pair.

 

[sireland67]

I have used ones, but they are still on a rusty car, so they may be pitted bad.

 

[hemi71x]

You just looking for one?
What side?
Left or right.
Side specific, where the parking brake cable goes through.

 

[R68DartGT]

I have used ones, but they are still on a rusty car, so they may be pitted bad.

Thanks but I'm looking for something for my show car. Thanks for info.

 

[R68DartGT]

You just looking for one?
What side?
Left or right.
Side specific, where the parking brake cable goes through.

I'm looking for the pair.
Thanks

 

[hemi71x]

I'm looking for the pair.
Thanks

Ok.
Your Heading and description didn't state plural, just plate.
Might what to ammend your ad to draw more attention to it.

 

[R68DartGT]

Ok.
Your Heading and description didn't state plural, just plate.
Might what to ammend your ad to draw more attention to it.

Done thanks

 

[sireland67]

Thanks but I'm looking for something for my show car. Thanks for info.

I know the ones I have would be pitted, I just blasted the door hinges off the same car, and they were pitted.

 

[72bluNblu]

DoctorDiff sells them. Not cheap, but powder coated and all new hardware.

Mopar 10 x 2 1/2" Drum Brake Assembly

Or used from here, they’re a good seller, I’ve used them before for brake parts

10 x 2.5 BRAKE BACKING PLATES REAR DRUM MOPAR DODGE 8 3/4 8.75 1965 1973 A B E | eBay

 

[R68DartGT]

DoctorDiff sells them. Not cheap, but powder coated and all new hardware.

Mopar 10 x 2 1/2" Drum Brake Assembly

Or used from here, they’re a good seller, I’ve used them before for brake parts

10 x 2.5 BRAKE BACKING PLATES REAR DRUM MOPAR DODGE 8 3/4 8.75 1965 1973 A B E | eBay

Thanks will check it out.

 

[4mulas]

Where in Canada are you. I have three sets that I’ll be reconditioning soon. I’m also in Canada. Send a pm if interested.

 

[toolmanmike]

Changed this thread to a want ad.