[WANTED] 11 of these lugnuts 7/16” thread, RH

-
Status
Not open for further replies.

cosgig

MoBro Inc.
FABO Gold Member
Joined
Jul 20, 2008
Messages
12,791
Reaction score
7,241
Location
Pinckney, Michigan
Rating - 100%
59   0   0
Contact seller
Howdy people, does anyone have any of these lugnuts in decent condition? I’m trying to get Nellas car back on the road to take to her celebration of life, and I am short 11 lugnuts. I have 20, but 10 of them are left handed. I’ll buy em, or trade if you want the left handed ones. I bought new tires, blasted and painted the caps, and am putting the Rallyes back on, like I promised her I would do. I’d like all the lugnuts to match.Any help would be much appreciated.

BB8CCAB8-4B81-4CDE-A2E4-4C7C12E9E26E.jpeg


792CB38B-8DF0-4FE4-A9C0-3CF1C4304DF3.jpeg


6700FDFA-F493-44E8-B9CF-C06018D46F2E.jpeg
 
Last edited:
I think I have 3 or 4 but don’t know if RH or LHthread. Ill have to see if I have a lug laying around to check
 
If these would be acceptable, they're $1.24 ea. at Rock Auto.

View attachment 1716386967

More Information for ULTRA-POWER 711109
I can always just buy a whole new set, but I thought I would check here first. I believe the nuts I have are original Rallye nuts, and I’d like to use them if possible. I took the rallyes off and put steelies and dog dish on the car, she didn’t like them and wanted the rallyes back on. Somewhere along the way I put in an 8 3/4” that had all RH studs, and I changed the drivers front drum to RH as well. With the steelies I just used regular nuts. Now that I’m back to rallyes I only have 10 RH nuts. I am hoping someone has a few. I have until the 26th to get the car running and driving, I will not fail. It needs to be at her celebration of life, she loved this car so much.
 

If you only need RH ones, just go buy a new set — they are easy to find. I have two different styles on my car — ones that look yours on the left side, and ones that look like the Rock Auto ones on the right side, because I still have LH threads on ONE wheel.

What size socket do yours take? Because I have some that take a 3/4, and some take a 13/16.
The socket size is 3/4” for the small bolt nuts, 1/2” nuts for LBP use the 13/16”
 
They are 13/16
I may have some originals
I will check later today
Yep, those would be for large bolt wheels. If you have any of the smaller ones, just message. If not, that’s ok, I can always buy a whole new set. I appreciate you looking Eddie, you’ve always come through for everybody here.
 
The socket size is 3/4” for the small bolt nuts, 1/2” nuts for LBP use the 13/16”
No, all of my nuts are for 7/16 studs. But I have a full set of 13/16 on my car right now with 7/16 studs, SBP.
 
I’d like to see those.
Here you go. As I said, I have two different styles. Here is the left front, RH 7/16 thread, 13/16 socket.
IMG_8362.jpeg


Here is the left rear, LH thread, 7/16 thread, 13/16 socket.
IMG_8364.jpeg


And here is the right rear, different style, RH thread, 7/16 thread, 13/16 socket.
IMG_8363.jpeg


I’m not saying any of these nuts are Mopar original, I’m just saying they exist.
 
Here you go. As I said, I have two different styles. Here is the left front, RH 7/16 thread, 13/16 socket.
View attachment 1716387614

Here is the left rear, LH thread, 7/16 thread, 13/16 socket.
View attachment 1716387616

And here is the right rear, different style, RH thread, 7/16 thread, 13/16 socket.
View attachment 1716387618

I’m not saying any of these nuts are Mopar original, I’m just saying they exist.
Gotcha, I see what’s going on there. If I had any other 7/16” threaded long nuts, I would consider using them for now. I found a whole nuther bag of the same nuts I have, I was stoked, until I saw it….the dreaded L stamp on them. Now I have 20 LH nuts! Yay me….or not! Thanks for the picture, I appreciate it.
 
Yeah, all my spares are lefties, too. Funny how that works.
 
Status
Not open for further replies.
-
Back
Top Bottom