1. Ceedawg

    Ceedawg Well-Known Member

    Messages:
    431
    Likes Received:
    301
    Joined:
    Aug 2, 2016
    Location:
    Va
    Local Time:
    1:28 PM
    ok here’s my problem, my 66 has 14” wheels and the 9-3/4 poverty cap. I want to use a 15x7 wheel but the wheels I have are the smaller 8-3/4 (later model) and bigger 10-3/4 circle (the diameter of those nubs that hold the cap on). Was there a wheel made in 15” that had the middle size nubs? Maybe in the 63-66 years? I didn’t see anyone who made aftermarket ones.
     
  2. toolmanmike

    toolmanmike FABO MODERATOR Staff Member FABO Gold Member

    Messages:
    59,683
    Likes Received:
    47243
    Joined:
    Jan 18, 2006
    Location:
    Iowa
    Local Time:
    12:28 PM
    Mopar didn't make 15" wheels for small bolt cars. You will need to contact places like Wheel Vintiques and ask if they have centers to make it happen. There is a guy that vends at The Nats that goes by The Wheel Guy that combines centers and hoops to produce steel wheels in different widths.
     
    Last edited: Aug 2, 2019
  3. Alaskan_TA

    Alaskan_TA Well-Known Member

    Messages:
    6,027
    Likes Received:
    4528
    Joined:
    Nov 12, 2004
    Location:
    PA
    Local Time:
    1:28 PM
  4. toolmanmike

    toolmanmike FABO MODERATOR Staff Member FABO Gold Member

    Messages:
    59,683
    Likes Received:
    47243
    Joined:
    Jan 18, 2006
    Location:
    Iowa
    Local Time:
    12:28 PM
  5. toolmanmike

    toolmanmike FABO MODERATOR Staff Member FABO Gold Member

    Messages:
    59,683
    Likes Received:
    47243
    Joined:
    Jan 18, 2006
    Location:
    Iowa
    Local Time:
    12:28 PM
  6. duster2

    duster2 Well-Known Member

    Messages:
    287
    Likes Received:
    68
    Joined:
    Nov 30, 2005
    Location:
    Near Terre Haute Indiana
    Local Time:
    12:28 PM
    That's me , The Wheel Guy , I have the correct wheel centers for big bolt , with the 10 inch dog dish cap.. PM me for more info.

    Frank






    @Ceedawg
     
    Last edited by a moderator: Aug 2, 2019
    • Thanks! Thanks! x 1
    • toolmanmike

      toolmanmike FABO MODERATOR Staff Member FABO Gold Member

      Messages:
      59,683
      Likes Received:
      47243
      Joined:
      Jan 18, 2006
      Location:
      Iowa
      Local Time:
      12:28 PM
      Thanks Frank. I knew you were from the Midwest. I think I have one of you business cards around if I would look.
       
    • Ceedawg

      Ceedawg Well-Known Member

      Messages:
      431
      Likes Received:
      301
      Joined:
      Aug 2, 2016
      Location:
      Va
      Local Time:
      1:28 PM
      Opps, my mistake, thought I was on for b-body’s only, I’ll pm the wheel guy thanks
       
    1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
      By continuing to use this site, you are consenting to our use of cookies.