[FOR SALE] 15"x 8" Wheel Vintiques Steelies

[ScreaminDemon340]

Have a Brand New set of 15"x 8" Steelies from Wheel Vintiques.

Backspacing is 3.25" with Large Bolt Pattern.

Bought them years ago for a different project and never used them.

$225 for the set. Need them gone.

 

[RustyRatRod]

Just an FYI. The measurement is taken from inside lip to inside lip, so they are 8" wide. Nice wheels. They appear to be 5 x 4.5 bolt pattern. Is that correct?

 

[junkyardhero]

DM incoming

 

[ScreaminDemon340]

Just an FYI. The measurement is taken from inside lip to inside lip, so they are 8" wide. Nice wheels. They appear to be 5 x 4.5 bolt pattern. Is that correct?

Yup. Big bolt pattern.

 

[rbkt65]

DM also sent. Inbox full. Not yet sent message. also next in line please.
@ScreaminDemon340

 

[doug 371]

I just noticed you're measuring the backspace on the front of the rim also?

 

[ScreaminDemon340]

I just noticed you're measuring the backspace on the front of the rim also?

Oh Crap ya. Ill remeasure them today. Thanks for the heads up.

 

[BrianT]

Not to be nit picky, but shouldn't backspace be measured from the raised area where the wheel actually touches the drum?

 

[ScreaminDemon340]

We've always measured from the flange. Even when we have them make us specific backspacing, it was always from that flange since that's where it bolts to the axle or on top of the drum. But honestly even if you measure at either point, it's not enough to make or break your wheel spacing unless you don't have enough room to start out with.