1965 barracuda gas pedal

[hdroyals]

just wondering if there is anybody that makes a gas pedal assembly for a 65 cuda. my floor pan was rusted out and the bottom of the pedal was rusted out were it bolts through the floor.
thanks for any info

casey

 

[340 demon 72]

I might have a gas pedal out of a 64 barracuda interested??

 

[340 demon 72]

if so please pm me

 

[hdroyals]

my car is a v8 i assume they are the same as /6 but forgot to mention it

 

[65 Dartman]

my car is a v8 i assume they are the same as /6 but forgot to mention it

V8's are completely different than the slant six.

 

[cosgig]

V8 and slant 6 gas pedals are completely different and will not interchange!! On the left in this pic is a slanty pedal, hollow in the back, shorter, slimmer, and has a wheel mounted at the top to actuate the linkage assembly that slant 6's use! On the right is a V8 pedal, taller, wider, solid construction with a rub pad to activate the flipper that the V8 cable style assembly uses!

 

[hdroyals]

thanks for the info probably saved me some money

 

[B-onefan]

Do you need the pedal or the base that bolts to the floor? If it's just the base, it should be the same on six or eight. In the picture cosgig posted, on the right you can see the silver pin on the base that separates the base from the pedal.

 

[Mopar Tim]

Yet another reason not to build mopars! ford and GM used the same gas pedal for all there engines. We are crazy aren't we?