[WANTED] 1967 barracuda 7-1/4 driveshaft

[rabfan]

I am looking for a driveshaft for a 1967 barracuda in the PITTSBURGH area. The car currently has a 318/727 and a 7-1/4 rear end. I need a driveshaft and rear drum brake hardware if you also have those. The car only has drums and backing plates.
I am trying to make the car drivable so I can get it home.
Thanks

 

[joel d. snyder]

contact jim cramer - cramer's auto parts in herman, pa. you will need the length of the driveshaft. are you sure it's a 727? most 318 - 7.25 combos had a 904. last 2 driveshafts i needed i got from jim. helpful hint - jim does not get up early. call in the afternoon.

 

[Dana67Dart]

@hollywood hig 7 1/4 drum brakes

 

[rabfan]

contact jim cramer - cramer's auto parts in herman, pa. you will need the length of the driveshaft. are you sure it's a 727? most 318 - 7.25 combos had a 904. last 2 driveshafts i needed i got from jim. helpful hint - jim does not get up early. call in the afternoon.

The car is not original. It used to be a 6 cylinder. Thank you for the reference, I’ll see what Jim has to say.