hammond472
Member
1967 Dodge Coronet R/T clone restomod project for sale or trade. 496 stroker motor with dyno and build sheet. 555 HP 611 ft-lb torque, Magnum Force tubular front suspension with Viking double adjustable coil over shocks, Rack and pinion steering conversation, upper and lower adjustable control arms and Wilwood disc brakes. Magnum Force tubular 4 linked rear suspension with double adjustable Viking coil over shocks and 8.75 sure grip rear 4:56 gears and 11"Drums, Magnum Force bushed aluminum motor plate. Magnum Force tubular sub frame connectors, Magnum Force forward strut kit, Built Torqueflite 727, Buckets with rare headrests, Console with floor shifter, Dash Clock, Vacuum performance console gauge, Original AM radio, Under dash courtesy light, Trunk light, Stock hood, Pin on fiberglass hood with glass W023/R023 Hemi super stock hood scoop, Full MSD stand alone ignition system, TTI headers, Sumped factory fuel tank, Magna Fuel Pro Star pump and regulator,Quick Fuel carb, All polished aluminum engine accessories including Powermaster 180 amp alternator, power steering pump, water pump and AC compressor. March Performance aluminum serpentine belt conversation, Schumacher motor mounts,
Line lock.Etc. The car started out as a Coronet 440. I used all factory R/T parts. R/T body emblems, center grill section, wheel arch moldings, rocker moldings, tail lights, trunk finish panel, door plaques, 150 mph speedometer, bucket seat and rear seat emblems}. I added factory buckets, center console and floor shifter. Inside and out she looks Mopar stock but will have way more horsepower, way better handling and better braking! Picture of car with rear end out was during the 4 link installation Engine is installed. Black interior is nice. New carpet, headliner, armrests and bases, The front seat frames have been bead blasted/powder coated and are ready for upholstery. This car looks bad *** and has the horsepower to back it up. $20k cash firm or
equal trade. No bikes boats or services. Looking for a newer vehicle. Prefer four door with automatic transmission and descent gas mileage but I'm negotiable. Car truck suv or cash. Might take a project or ?as part trade as well.
Line lock.Etc. The car started out as a Coronet 440. I used all factory R/T parts. R/T body emblems, center grill section, wheel arch moldings, rocker moldings, tail lights, trunk finish panel, door plaques, 150 mph speedometer, bucket seat and rear seat emblems}. I added factory buckets, center console and floor shifter. Inside and out she looks Mopar stock but will have way more horsepower, way better handling and better braking! Picture of car with rear end out was during the 4 link installation Engine is installed. Black interior is nice. New carpet, headliner, armrests and bases, The front seat frames have been bead blasted/powder coated and are ready for upholstery. This car looks bad *** and has the horsepower to back it up. $20k cash firm or
