1967 Dodge Dart 270

[Sean Officer]

I like them as well. I am going to pick up the rocker panel moldings and black them out too. Have I mentioned I dislike "chrome?" Mancini racing is the only place I have found the clips so far though. Mine are all missing.

 

[Dana67Dart]

Mancini racing is the only place I have found the clips so far though. Mine are all missing.

Are you talking the wide GT molding?


ATTN: 67 Dart GT Owners. NEW Rocker trim clips

 

[Sean Officer]

Thanks Dana! Those look very similar to what's on the Dart at the moment. I am not sure if the molding for the 270 is the same as the GT or not. My 270 has the holes and some of the clips, but the molding was missing when I bought the car. Initially I was just going to weld the holes closed and forgo the molding, but I found that I liked in in several of the photos I found online.

 

[Dana67Dart]

Mancini racing is the only place I have found the clips so far though.

Can you post a link to Mancini

 

[Sean Officer]

I was mistaken. It was Dante's and they are the ones for the thinner molding in the picture below.

DMPS-9704-270271 Mopar 1967-69 Dodge Dart Rocker Molding Clips - dantesparts.com

Find DMPS-9704-270271 Mopar 1967-69 Dodge Dart 1971-73 Dodge Charger Rocker Molding Clips and other parts you need at dantesparts.com, Mullica Hill, NJ.

dantesparts.com

 

[Troub]

I was mistaken. It was Dante's and they are the ones for the thinner molding in the picture below.

http://[URL]https://dantesparts.com/i-30499546-mopar-1967-69-dodge-dart-rocker-molding-clips.html

[/URL]

View attachment 1716297240

Soooo.... those are the clips for the standard rocker molding or no?

 

[Dana67Dart]

Soooo.... those are the clips for the standard rocker molding or no?

Looks like it. They are not for the 3 " wide GT. And while they look similar to the fender top GT trim I don't think they are for the fender top.