1967 Dodge Dart convert to Modern a Little Reality help needed

[Cartierusm]

What do yall think? Is replacing the entire suspension necessary for a good ride or will the stock suspension be OK if I replace all the necessary parts, bushing, shocks, etc..? Cause a lot of my cost estimate is about $12K for a full suspension kit from RMS or QA1, that's not including brakes and rotors. I would replace the rotors and brakes anyway so it's new disc brakes all around.

 

[junkyardhero]

you can make a car handle very well and ride quite nicely with upgraded stock components and a few trick parts thrown in. getting there isn't going to be significantly cheaper, but it won't be full boat.

there was just a discussion about this with a cost break down between the systems.

 

[Cartierusm]

Ah ok. Do you know the title of the thread?

 

[junkyardhero]

Best Aftermarket Suspension Set-up

Ok so I'm looking for opinions on aftermarket tubular k-member set-ups. A little background on what I'm working with. 1968 Dart 560hp 499ci low deck. 727 TF, 3:91s, Mini tubbed, frame ties. If you've been on this site for a while the name John Dillenger may ring a bell. he engineered a homemade...

www.forabodiesonly.com

 

[Cartierusm]

Awesome, Thanks.