1967 (one year only) Radio Delete Plate for BARRACUDA

[Dana67Dart]

I all, I helping a member with a radio delete plate for his Barracuda, I have deduced the height and width and the post spacing and length but what I can't deduce is the thickness.

If anyone has an OEM 67 Barracuda radio delete plate handy would you PM me so I can get the dimensions I need to finish this project.

It looks to have part number 2822554 on the back

I have seen the several posts here on FABO about the delete plate but none that I found had anything available about the thickness.

Thanks all.

Dana

 

[CFD244]

Give me a bit Dana...I have one kicking around here somewhere. The 67 is actually the same as a 71 rallye dash unit. One is black, and the other is silver/grey.

 

[CFD244]

PM sent

 

[davescuda]

I all, I helping a member with a radio delete plate for his Barracuda, I have deduced the height and width and the post spacing and length but what I can't deduce is the thickness.

If anyone has an OEM 67 Barracuda radio delete plate handy would you PM me so I can get the dimensions I need to finish this project.

It looks to have part number 2822554 on the back

I have seen the several posts here on FABO about the delete plate but none that I found had anything available about the thickness.

View attachment 1716485684

Thanks all.

Dana

Same as 71 rally Dash delete plate just different color. I believe I have one

 

[matthon]

It has a unique edge, mine in pic and I don't even recall if it goes around all 4 sides.

 

[CFD244]

@Dana67Dart as you can see in the last pic ^^^^^^^

That (top center) would co-inside with that .015 recess that I mentioned in my PM .

 

[matthon]

The recess on the back is on the top, on the bottom in the pic below.

It's there to clear the upper part of the radio dash bezel, which goes right up to the upper edge.