1967 Plymouth Barracuda Dash wiring help

Electrical and Ignition

  1. bmoparmofo

    bmoparmofo Well-Known Member

    Messages:
    76
    Likes Received:
    13
    Joined:
    Aug 19, 2010
    Location:
    Michigan
    Local Time:
    12:21 PM
    Hi trying to redo the dash wiring in the 67 Barracuda.Somebody else had started pulling the wiring out and I'm not sure where this plug is from. If anybody can help I would appreciate it .thanks!

    20180915_185455.jpg
     
  2. MoparLeo

    MoparLeo NRA PATRON LEVEL LIFE MEMBER

    Messages:
    431
    Likes Received:
    243
    Joined:
    Feb 10, 2016
    Location:
    Moreno Valley, Cal. So. Cal.
    Local Time:
    9:21 AM
    Best to get a wiring diagram for your car. Online.
     
    • Agree Agree x 1
    • 4spdragtop

      4spdragtop FABO Gold Member FABO Gold Member

      Messages:
      25,700
      Likes Received:
      5158
      Joined:
      Aug 28, 2009
      Location:
      Ontario
      Local Time:
      11:21 AM
      Those 3 are oriented to pins on upper LH top corner or panel(when looking at panel as driving.)
       
    • Dana67Dart

      Dana67Dart Like a fine wine, only getting better with age! FABO Gold Member

      Messages:
      2,154
      Likes Received:
      1000
      Joined:
      Jul 16, 2017
      Location:
      Northern Colorado
      Local Time:
      10:21 AM
    • bmoparmofo

      bmoparmofo Well-Known Member

      Messages:
      76
      Likes Received:
      13
      Joined:
      Aug 19, 2010
      Location:
      Michigan
      Local Time:
      12:21 PM
      Thanks, so you're saying that hooks to the instrument panel cluster? Wasn't too sure as somebody else had removed it
       
    • 4spdragtop

      4spdragtop FABO Gold Member FABO Gold Member

      Messages:
      25,700
      Likes Received:
      5158
      Joined:
      Aug 28, 2009
      Location:
      Ontario
      Local Time:
      11:21 AM
      Heres a pic of back of my spare cluster. I think that's where those wires go.
      Download manual as mentioned above asap. They are free and your best tool.

      20180915_211946.jpg

      20180915_211956.jpg
       
      • Like Like x 1
      • bmoparmofo

        bmoparmofo Well-Known Member

        Messages:
        76
        Likes Received:
        13
        Joined:
        Aug 19, 2010
        Location:
        Michigan
        Local Time:
        12:21 PM
        Thanks for the replies and your help all...its very much appreciated!
         
        • Thanks! Thanks! x 1
        • cudajim

          cudajim cudajim

          Messages:
          1,377
          Likes Received:
          30
          Joined:
          Jan 17, 2006
          Location:
          Grass Valley, Ca.
          Local Time:
          9:21 AM
          Yup, it does go to the instrument panel as pictured above. Just make sure you get all 3 plugged in, it's kind of tough to do after the panel is installed but it can be done.
           
        1. This site uses cookies to help personalize content, tailor your experience and to keep you logged in if you register.
          By continuing to use this site, you are consenting to our use of cookies.