jonesboys
Well-Known Member
lower interior door below the door card toward the rear what was the rectangular opening used for and looks like something like a light or bezel is missing on mine ?
1968 barracuda
- Thread starter jonesboys
- Start date
-
Its an exit vent for the flow through ventilation system. It's a plastic grille like the picture posted above.
Look at any Barracuda factory literature and you'll see the theory.
Look at any Barracuda factory literature and you'll see the theory.
On Barracuda's '67-'68 doors only
volunteer
Well-Known Member
Ahh, Power Fist, Excel gum, 1-lb. propane cyl., Folgers coffee, synthetic polishing rags and assorted Rockauto fridge magnets. Could be any of our shops.
.jonesboys
Well-Known Member
thanks flow thru ventilation in 1968 well all six of my doors are missing the plastic pcs so i think ill just weld em shut
I believe these vents also lent themselves to venting cabin pressure when closing the door with the windows up. You may want to consider not sealing them up tightly.jmo
-
