[SOLD] 1969 340 unassembled Short Block 372 Cubic Inch

-
Status
Not open for further replies.
M

Moparturbo

Well-Known Member
Joined
Aug 16, 2023
Messages
47
Reaction score
35
Location
Ohio
Rating - 0%
0   0   0
Contact seller
I have a .020 over machined 1969 340 block that comes with reconditioned rods, New Scat Cast crank with 3.58 stroke for the 340 mains, New TRW L2405F60 forged pistons to make it a 372.
I live outside of Zanesville Ohio. You can pick up in person or I will ship on your dime based on shipping quotes we go over. I am asking 2500.00. Pictures attached. Thanks

IMG_6047.jpg


IMG_6048.jpg


IMG_6049 (1).jpg


IMG_6050.jpg


IMG_6051 (2).jpg


IMG_6052 (2).jpg


IMG_6053.jpg


IMG_6092.jpg
 
Last edited:
Perhaps you could show a better picture of the vin on the pan rail? Some here still looking for their motor.
 
You say the block is .030" over? A 340 has a stock bore of 4.04", plus the .030" overbore that equals 4.070"

How are .060" over 4.00" 360 pistons going to work out at out 4.060" in a 4.070" bore?

Tom
 
Last edited:
PROSTOCKTOM said:
You say the block is .030" over? A 340 has a stock bore of 4.04" bore plus the .030" overbore. That equals 4.070"

How are .060" over pistons going to work at 4.060" or 4.100"?

Tom
Click to expand...
uhh.....with some blowby?
 
You will not get blowby if the pistons won't fit the hole to begin with.
 
I missed it being 360 pistons.

Sorry there, thought we were talking 340 stuff.

Did the 360 pistons come from the part #s?

I did not look that up.

I see it now.
 
Last edited:
PROSTOCKTOM said:
You say the block is .030" over? A 340 has a stock bore of 4.04", plus the .030" overbore that equals 4.070"

How are .060" over 4.00" 360 pistons going to work out at out 4.060" in a 4.070" bore?

Tom
Click to expand...
Thanks for catching that. I was asleep at the wheel on that one. No idea why I was thinking that. Post is fixed
 
Status
Not open for further replies.
-

Back
Top