1969 Plymouth Valiant Rear Quarter

[3404speed]

need the front section of the left, driver's side rear quarter panel, could even use the skin from a 4 door rear door. The area had been it and the metal is really stretched, check it out here: http://www.forabodiesonly.com/mopar/showthread.php?t=71862

Thanks

Plenty of A body parts to trade if possible

 

[wilbanks]

Ive got a 69 valiant 4 door parts car. Email me at [email protected], and i will send some pics. Hope this helps.

 

[sleeper-oem]

I just joined i know this is old but i can use body parts of a 69 4 door if you still have it thanks

 

[waggin]

yes be careful what ya get here ,bruce and I were looking over several sets Of old doors i had here and noticed some diffrences in the body line and 1/4 panels on the four door cars

 

[3404speed]

I have what I need, if you check the link at the bottom of my signature line...Thanks for posting...another member here needs most of the passenger's side for a 2 door...

 

[sleeper-oem]

Thank you I will i have heard you can trim the two doors down to match but only a small portion. I really would hate hacking a good quarter panel for that. I believe i will have to do the metal work myself just very time consuming and well not the real deal but if it stops rust.

 

[cudamark]

I just joined i know this is old but i can use body parts of a 69 4 door if you still have it thanks

What '69 Valiant 4dr parts are you looking for?