tcp710
Well-Known Member
- Joined
- Aug 21, 2005
- Messages
- 65
- Reaction score
- 0
I have a 67 valiant that has the 4 piston kelsey hayes disc brakes from a 1970 swinger. The previous owner redrilled the rotors and hubs to match the 5 on 4 1/2" bolt pattern, but redrilled them poorly. He had to bend the wheel studs to make the rims fit. The rotors have also been turned too many times and are worn out. Besides replacing the system with a 73-76 disc system, is there anyway to keep the 4 1/2" bolt pattern without changing this setup?