kevindahle
Well-Known Member
Heres my Dart Ive been tinkering on for a while got it in epoxy today, its a a4 gunmetal gray with white top, have a 68 340 for it!! Installed frame connectors, collecting pices for a few years.
1971 Dart
- Thread starter kevindahle
- Start date
-
smlveightis
Confused in Confusion
Looking good!
pettybludart
Well-Known Member
Looks good!You have alot of work ahead of you.Good luck.
kevindahle
Well-Known Member
This what my Duster looked this morning, started right up though!! Got to love North Dakota!!
kevindahle
Well-Known Member
The rotiserie I built for nothing out of scrap, the pivot points I used rear spindles off a junk chevy cavalier and used a brake master cylinder off a old harley to hold the car in whatever position I want . I love it it makes life much easier.
70DartMike
Too many projects
Looks good so far. Engine built yet?
kevindahle
Well-Known Member
I have a complete 68 340 out of a gts that was wrecked decades ago and a 727 out of my duster before I converted it to a 4 speed, but I can't help but keep thinking of the original slant 6, I have all the old drivetrain, out of all the Mopars I've had in the past the most user friendly was the slant 6 and 318 cars that were left stock and were used every single day, everything else like my big-block Charger, Duster with a health small-block are crazy fun to drive but not practical use more than occationally. what I need is a 400 horse sb that gets 25mpg!! then I would be happy!! I am leanig toward the 340 but need to hold my self from wanting to build it radical.
kevindahle
Well-Known Member
Got some paint on!! the last pic is of the rust free arizona one of the 1/4 panels I painstakely salvaged off a car, along with the outer wheel housings and trunk extensions.
kevindahle
Well-Known Member
This weekend projects include striping the used 1/4 panels, installed a new fuel sender on the duster thinking my gas gauge would work but didn't.
-
Similar threads
