[FOR SALE] 1971 Running 340 Cuda Motor

-
Status
Not open for further replies.
Blackcoronet440

Blackcoronet440

Member
Joined
Jul 6, 2017
Messages
16
Reaction score
1
Location
California
Rating - 0%
0   0   0
Contact seller
I'm selling my 1970 340. I bought this as a future motor for an valiant project but I'm Gunna stick to my B Body's.. this motor was built in the early 2000's and was in a dart. The motor has 12 passes on it and as you can see it's very fresh inside. It features a steel 340 crank with stock rods, Ross 12:1 pop up pistons. Cam is a Mopar 590 purple shaft with Smith brothers push rods and gold crane rockers. The heads are X heads ported to the moon and 2.08 intake valves!. It comes with 2 intake mainfolds stock, and a Holley Strip Dominator. I have TRW 10.5:1 forged pistons that will also come with the motor. Now I opened the motor up to have a look so it will need to be re sealed up inculding the head gaskets which I have a felpro gasket set I'll send with you. Only thing I have done is repaint the motor. So who ever gets this they have a choice between stock compression for a sweet street motor or a nasty little 12 to 1 pissed off 340. You can ask me any questions you would like I'll do my best to answer quickly. I have a lot more Pictures on my phone so please pm me for my number. I will ship it need be for an additional cost. $3400.00 OBO Thank you for looking!!!


19437784_10213049757744791_8999870913446283786_n.jpg


19510209_10213049752624663_1905796671455926790_n.jpg


19437645_10213049752224653_6792433132819333359_n.jpg


19601250_10213049757784792_3062638219853283210_n.jpg
 
No headers. But I do have factory 4 piston caliper front brake set up with upper control arm and steel braided lines. And a set of centerline's small bolt pattern. Gorgeous rims like out of the box. O and a brand new A body fuel tank with a sump in it. What size carb?
 
Do you have photos of the centerlines? Also, I know they are sbp but what size are the wheels if you don't mind me asking. What are you looking to get for them? Thank you (Scampman)
 
Ok here is the pics of the tank and brakes.
Brakes are small bolt pattern small ball joint. 3" studs steel braided lines. Tank is 68-70 Abody dart

650 or obo for brakes
250 for tank.

IMG_20170719_185639829.jpg


IMG_20170719_185629289.jpg


IMG_20170719_185614115.jpg


IMG_20170719_185559886.jpg


Screenshot_20170720-122111.png
 
15x 8 bs is 4" 15x4 fits stock Abody as you can see. Rear tires come with the rims hooiser street comps or whatever they call them. 27 x 10.5 800 plus the ride. Obo
 
Status
Not open for further replies.
-

Back
Top