[WANTED] 1972 valves

[dad69dds]

I need four 1972 duster
340 2.02 valves

 

[rumblefish360]

Stock valves? Have you checked Mellings?

 

[Jadaharabi]

They never put 2.02 valves in the 72 340s. They used 1.88s.

 

[rumblefish360]

That maybe true, I’m sure he measured what he has….
At least hope he did…..

 

[rumblefish360]

1.88 - by Melling
PLYMOUTH Melling V1180 Melling Valves | Summit Racing

No Melling’s valves at 2.02, Manley - a little pricey, though it is a nice valve.
PLYMOUTH 5.6L/340 Mopar small block LA Valves Camshafts & Valvetrain Engines & Components - 2.020 in. Intake Valve Head Diameter (in.) - 0.371 in. Intake Valve Stem Diameter (in.) - 4.980 in. Intake Overall Valve Length (in.) - Free Shipping on Orders Over $109 at Summit Racing

 

[RustyRatRod]

They never put 2.02 valves in the 72 340s. They used 1.88s.

You are correct, sir. As usual.

 

[Jadaharabi]

1.88 - by Melling
PLYMOUTH Melling V1180 Melling Valves | Summit Racing

No Melling’s valves at 2.02, Manley - a little pricey, though it is a nice valve.
PLYMOUTH 5.6L/340 Mopar small block LA Valves Camshafts & Valvetrain Engines & Components - 2.020 in. Intake Valve Head Diameter (in.) - 0.371 in. Intake Valve Stem Diameter (in.) - 4.980 in. Intake Overall Valve Length (in.) - Free Shipping on Orders Over $109 at Summit Racing

In March I bought a set of 202 stock length 3/8 valve stem, stainless steel valves from Indy cylinder head for $120 for a set of eight.

Correction I bought a set of 1.88 valves not 2.02's. Sorry about that.

 

[dad69dds]

I know but these are not stock heads

They never put 2.02 valves in the 72 340s. They used 1.88

 

[Jadaharabi]

I know but these are not stock heads

Call Indy Cylinder Head. They had both 1.88 and 2.02 stainless steel stock length valves.