Disassembled 1976 360.
Indianapolis, IN 46202
$300 OBO
Local Pickup Only
Cash Preferred
Unfortunately needing to sell the 360 that has been in my Barracuda since I bought it to make some space in my garage. I disassembled the motor, had the block cleaned, new cam bearings put in and honed the cylinders before I changed directions to a Magnum swap. Engine is bored 0.040 over and will likely need 0.060 overbore to clean up the light scoring and pitting in the cylinders. Engine ran fine and had good compression before I tore it out for a Krylon rebuild.
There is light scoring and pitting in pretty much every bore, you can just barely hang a nail on it but it is visible and did not clean up with a dingle ball hone.
Includes entire rotating assembly (crankshaft, rods and pistons), none of it seems to be hot rod parts, just all original cast crank/rods and OEM replacement 0.040 pistons.
Includes disassembled heads, casting #3769974, valves, rocker shafts, and rockers.
DOES NOT INCLUDE: Oil pan, oil pump, pickup tube, dipstick, 90 degree oil filter adapter, intake manifold, valve covers.
I can post additional photos if needed/allowed.
Thanks!
Indianapolis, IN 46202
$300 OBO
Local Pickup Only
Cash Preferred
Unfortunately needing to sell the 360 that has been in my Barracuda since I bought it to make some space in my garage. I disassembled the motor, had the block cleaned, new cam bearings put in and honed the cylinders before I changed directions to a Magnum swap. Engine is bored 0.040 over and will likely need 0.060 overbore to clean up the light scoring and pitting in the cylinders. Engine ran fine and had good compression before I tore it out for a Krylon rebuild.
There is light scoring and pitting in pretty much every bore, you can just barely hang a nail on it but it is visible and did not clean up with a dingle ball hone.
Includes entire rotating assembly (crankshaft, rods and pistons), none of it seems to be hot rod parts, just all original cast crank/rods and OEM replacement 0.040 pistons.
Includes disassembled heads, casting #3769974, valves, rocker shafts, and rockers.
DOES NOT INCLUDE: Oil pan, oil pump, pickup tube, dipstick, 90 degree oil filter adapter, intake manifold, valve covers.
I can post additional photos if needed/allowed.
Thanks!
