1977 PLYMOUTH SPORT FURY

[TYLER_HILL98]

I HAVE A 1977 PLYMOUTH SPORT FURY. AS I AM NOT THE MOST MECHANICALLY SAVVY PERSON OUT THERE, IM IN DIRE NEED OF SOME ASSISTANCE. I HAVE A 1406 EDELBROCK CARB WITH A 2696 FOUR HOLE SQUARE BORE TO SPREAD BORE CARB ADAPTOR. I WOULD LIKE TO CONVERT IT TO A 4 BARREL, PUT NEW HEADERS ON IT, A NEW CAM, A NEW EXHAUST SYSTEM (RUN IN FRONT OF BOTH BACK TIRES/NEEDS TO BE LOUD OBVIOUSLY), AND MAYBE A FEW OTHER TWEAKS AND SUGGESTIONS TO REALLY KICK OF THIS BEAUTY AND MAKE IT RUN WELL AND SOUND BETTER. ANY TID BIT OF ADVICE WOULD BE VERY HELPFUL.

 

[Dan the man]

I HAVE A 1977 PLYMOUTH SPORT FURY. AS I AM NOT THE MOST MECHANICALLY SAVVY PERSON OUT THERE, IM IN DIRE NEED OF SOME ASSISTANCE. I HAVE A 1406 EDELBROCK CARB WITH A 2696 FOUR HOLE SQUARE BORE TO SPREAD BORE CARB ADAPTOR. I WOULD LIKE TO CONVERT IT TO A 4 BARREL, PUT NEW HEADERS ON IT, A NEW CAM, A NEW EXHAUST SYSTEM (RUN IN FRONT OF BOTH BACK TIRES/NEEDS TO BE LOUD OBVIOUSLY), AND MAYBE A FEW OTHER TWEAKS AND SUGGESTIONS TO REALLY KICK OF THIS BEAUTY AND MAKE IT RUN WELL AND SOUND BETTER. ANY TID BIT OF ADVICE WOULD BE VERY HELPFUL.

You didn't mention which engine you have. With it being a sport fury, most likely it has a 360 sb or a 400bb. There was 4 engines available for the 1977 fury, 225 super 6 with a 2 barrel carburetor, 318,360,400.If it's the 360 I think that you should focus on low end torque. Select a intake manifold and the camshaft with low to midrange torque. Those furys are heavy, a 3.55 gear ratio would help you too, maybe even 3.73. Headers, 1 5/8" long tube headers with a 2 1/2" exhaust system.

 

[Dan the man]

I HAVE A 1977 PLYMOUTH SPORT FURY. AS I AM NOT THE MOST MECHANICALLY SAVVY PERSON OUT THERE, IM IN DIRE NEED OF SOME ASSISTANCE. I HAVE A 1406 EDELBROCK CARB WITH A 2696 FOUR HOLE SQUARE BORE TO SPREAD BORE CARB ADAPTOR. I WOULD LIKE TO CONVERT IT TO A 4 BARREL, PUT NEW HEADERS ON IT, A NEW CAM, A NEW EXHAUST SYSTEM (RUN IN FRONT OF BOTH BACK TIRES/NEEDS TO BE LOUD OBVIOUSLY), AND MAYBE A FEW OTHER TWEAKS AND SUGGESTIONS TO REALLY KICK OF THIS BEAUTY AND MAKE IT RUN WELL AND SOUND BETTER. ANY TID BIT OF ADVICE WOULD BE VERY HELPFUL.

It's not like the members here to ignore a post, but they sure did you. I'd move on if I was you.