241 Hemi Swap

[38 Dodge]

OK here is where I'm at on my Hemi conversion:
I'm about to fire up the Hemi Engine to swap it into my 62 Valiant Wagon but I need some advice / help. I was wondering if anyone knows if there is or have a 727 V8 small block push button transmission. I can get a adapter for a 727 Transmission to bolt up to my Hemi but I would like to keep my push button features.
Also what is the differance between the 727 and the 904 as far as if I could use either one with the adapter?
Thanks for any advise or help

 

[65 Dartman]

I'd venture a guess and say that a 727 pushbutton was available in a 63 or 64 B Body with the 318 poly. I had a 65 Coronet with the poly and a 727 dual cable column shifted.

 

[64DartGTinAZ]

I can get a adapter for a 727 Transmission to bolt up to my Hemi but I would like to keep my push button features.

There are adapters to convert newer Torqueflites to pushbutton - found this one quickly with the search on this forum, but look around, there are others...I found a couple when I looked a few months back:

http://www.forabodiesonly.com/mopar/showthread.php?t=99237&highlight=push+button+adapter

 

[moparlee]

I don't know, but man it will be cool to see you do the build. I've got a 241 Hemi myself and a 392 Hemi that I would like to do something with one of these days.

 

[38 Dodge]

I have a 241 and a 270 Hemi and my plans are to put the 241 in the Wagon and the 270 in my 38 Pickup. Now if I get enough time off in the evenings to get the 241 fired up I will start pulling the wagon apart

 

[moparlee]

Cool, post pictures please.

 

[38 Dodge]

I will once I start working on the install