My block and parts came back from my machine shop. Included in the package is a hydraulic compcam and lifters. I am not opposed to going hydraulic but do I have to change my rocker arms and push rods too? Or can I use the adjustable rockers that I have? Any advise?
273 Commando build, need advice
- Thread starter Dervco
- Start date
-
Witch rockers and pushrods do you have?
The rockers will work but you will need different pushrods. (shorter ones)
I don't know the specific length but I'll bet someone that has swapped to hydraulic will chime in. tmm
I don't know the specific length but I'll bet someone that has swapped to hydraulic will chime in. tmm
I read through your build thread but did notice what you did for lifters, so what did you use?
I used a Isky E-4 solid lifter cam and their recommended lifters. Solid lifters are hollow to about half way down and use longer pushrods. tmm
AdamR
Big Member
It would probably be easiest to pick up a set of stock rockers and push rods.
-
