[SOLD] 273 Heads

-
Status
Not open for further replies.
bobscuda67

bobscuda67

Well-Known Member
Joined
Aug 27, 2005
Messages
2,106
Reaction score
387
Location
Michigan
Rating - 100%
6   0   0
Contact seller
I have a pair of stock 273 heads that came off my 67 engine. They have some rust on the machined surfaces and will need to be cleaned up. They have been angled milled to a closed chamber head for a bump in compression. All the valves were bought new and there's about 2000 miles on the valve job.
Asking $50.00 for the pair and shipping cost is extra from 48182. Or I can deliver them to the Nats in Columbus for you.
DSCN0856.JPG
DSCN0857.JPG
 
I'm assuming the intake side of the heads has been milled as well to use a stock intake manifold?

Thanks, I'm interested.
 
Yes. The intake side was milled and the cast iron 4 barrel manifold I was running sealed great with no leaks.
I will post the head number latter today.
 
I will be at the Nats and can pick up there. I'll take them. PM your information so I can pay you. I also have some parts for sale or trade on here that I can bring to the Nats if you want to trade anything.

Just let me know and I'll send payment.

Thanks,

Nick
 
Yes. I used a Hughes hydraulic cam in my 273.
If you want to pm me with the contact information we can figure it out.
 
Status
Not open for further replies.
-

Back
Top