[FOR SALE] 273HP intake manifold

-
Status
Not open for further replies.
L

Leon441

Well-Known Member
Joined
Mar 9, 2007
Messages
83
Reaction score
9
Location
Lynchburg, VA
Rating - 0%
0   0   0
Contact seller
273 HP intake manifold for 66 and later 2536563

$100 or make offer

20170306_174650.jpg


20170307_202452.jpg
 
Last edited:
was told the 66 has a different bolt size on the 273 and are angled differently, is this true? need it for a 67 cuda with 273.
 
Either the cast part number has the last 2 numbers reversed or my casting number chart is wrong. My chart shows 2536536 is for '66-'67. I would like to know if your I.M. has been altered or milled in any way. Are the mounting bolt perpendicular to the port face and what size are the bolt holes? I may also like to make an offer.
Thanks, Richard
 
Richard Sweet said:
Either the cast part number has the last 2 numbers reversed or my casting number chart is wrong. My chart shows 2536536 is for '66-'67. I would like to know if your I.M. has been altered or milled in any way. Are the mounting bolt perpendicular to the port face and what size are the bolt holes? I may also like to make an offer.
Thanks,
Click to expand...
Richard Sweet said:
Either the cast part number has the last 2 numbers reversed or my casting number chart is wrong. My chart shows 2536536 is for '66-'67. I would like to know if your I.M. has been altered or milled in any way. Are the mounting bolt perpendicular to the port face and what size are the bolt holes? I may also like to make an offer.
Thanks, Richard
Click to expand...
3/8" hole perpindicular with flange. But, notice the picture under flange around bolt holes. Doesn't appear milled or drilled to me.

20170827_150219.jpg
 
Status
Not open for further replies.
-

Back
Top