1 1969340dart Well-Known Member Joined May 17, 2006 Messages 441 Reaction score 8 Location Porter Texas Nov 3, 2007 #1 What is the exact bore size for a 340 bored .040
Bill Dedman bill dedman Legendary Member Joined Oct 16, 2007 Messages 3,987 Reaction score 140 Location Conway, Arkansas Nov 3, 2007 #2 That would be 4.080" Stock 340s have a 4.040"-inch bore. Hope this helps... Bil, in Conway, Arkansas
1 1969340dart Well-Known Member Joined May 17, 2006 Messages 441 Reaction score 8 Location Porter Texas Nov 3, 2007 #3 Thanks Bill.I was looking at a set of pistons on e bay but they will not work.I need a set for a .040 bore 340 engine. Thanks a lot for your help. Bobby
Thanks Bill.I was looking at a set of pistons on e bay but they will not work.I need a set for a .040 bore 340 engine. Thanks a lot for your help. Bobby
Bill Dedman bill dedman Legendary Member Joined Oct 16, 2007 Messages 3,987 Reaction score 140 Location Conway, Arkansas Nov 4, 2007 #4 You're welcome. Good luck on the pistons!