[WANTED] 340 cross ram 2-4bbl

[MAPS]

I was at the Carlisle show and there was a fellow selling a cross ram (2 x 4 bbl) that was not there when I went had some fellow watching out for his spot, if anyone knows who this is or how I can reach him, I'd really appreciate any help finding him.
Thanks,
Maps

PS Big thanks to Physixx, thanks for having the Caltracs sent up there for me. Nice doing business with you.

 

[Hemihead2]

NOT MINE- I’m not sure if this is the one you were looking at but it’s on the Harrisburg, Pa CL

 

[MAPS]

Hemihead
That's it, so you know how I can reach him?
Thanks again for the heads up.......
Maps

 

[pishta]

Do yourself a favor and put/hide a core plug somewhere on that plenum. One good backfire without a blow off vent and the top will split like the San Andreas Fault. Back wall of passenger side carb is a good place out of sight. I had one (without a top, that's how I could afford it) and the first start of a pair of 390's popped the custom 1/4 inch plate top. I made a 2nd 2X4 and 3rd 4bbl top out of 3/8 plate and those survived without a backfire. I ran the single 4 the most, but the dual 390s looked better. Custom cable linkage.